Go Back   Forno Bravo Forum: The Wood-Fired Oven Community > PhotoPlog

  Toggle Photo Gallery Navigation

Toggle Vent and Chimney - arch and chimney done
Click to view original

Toggle Information
Posted By merlyn [Profile] [Photo Gallery]
Category Vent and Chimney
Title arch and chimney done
Description with the arch chimney and landing done . I used a 1inch stainless steel channel for the thermal break in the landing filled with ceramic board . then went with some granite it was a free sink cut out I trimmed up on the brick saw ..[ there are a lot of company's doing granite counter tops and they will give you the cut outs] finished with some brick . now some Patience for a week or 2 to dry it up before the ceramic blanket .
Original Filesize 119.9 KB
Original Dimensions 640 x 480
Date Posted 09-01-2014 12:43 PM
Number Of Views 363

All times are GMT -7. The time now is 11:36 PM.

Powered by vBulletin® Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
2006/10 Forno Bravo, LLC