#1  
Old 12-13-2012, 02:47 PM
Serf
 
Join Date: Aug 2012
Location: Forida
Posts: 13
Default Casa2g90

When insulating with the blanket provided , do you just insulate the dome ? Or the landing area before the steel door too ?
Reply With Quote
  #2  
Old 12-13-2012, 03:18 PM
Laurentius's Avatar
Master Builder
 
Join Date: Nov 2010
Location: Japan
Posts: 844
Default Re: Casa2g90

Hi Vincenz,

Have you seen or read any of the Pompeii Oven Plans? You owe it to yourself to do a little research before you start your project. Arm yourself with the basic, there will be times when you really need help and advice.
Reply With Quote
  #3  
Old 12-13-2012, 11:22 PM
david s's Avatar
Il Pizzaiolo
 
Join Date: Mar 2007
Location: Townsville, Nth Queensland,Australia
Posts: 4,716
Default Re: Casa2g90

Laurentius,
The Casa2G is a FB oven not a home build.

Vincenzo,
Read the installation instructions and if they don't answer your question then contact FB.
Reply With Quote
  #4  
Old 12-14-2012, 12:10 AM
Laurentius's Avatar
Master Builder
 
Join Date: Nov 2010
Location: Japan
Posts: 844
Default Re: Casa2g90

"Vincenzo,
Read the installation instructions and if they don't answer your question then contact FB."

What David, said.
Reply With Quote
  #5  
Old 12-14-2012, 04:05 PM
Moderator 2
 
Join Date: Jun 2012
Location: monterey ca
Posts: 47
Default Re: Casa2g90

Hi Vincenz

You do not put the insulation blanket on the landing. You just drape each layer of insulation over the dome. Take a look at the installation manual it will show a photo of how it should look. Good Luck
Reply With Quote
  #6  
Old 01-09-2013, 04:02 PM
Serf
 
Join Date: Oct 2012
Location: Arkansas
Posts: 8
Default Re: Casa2g90

Good question! I am researching this right now. I think if you don't have to insulate the vent arch it will be easier to maintain the igloo shape.
Reply With Quote
  #7  
Old 01-09-2013, 10:41 PM
SableSprings's Avatar
Apprentice
 
Join Date: May 2009
Location: Roseburg, OR USA
Posts: 214
Default Re: Casa2g90

I helped a friend install a Casa2g90 a couple of years ago. We laid chicken wire on our concrete foundation first, assembled the oven (ceramic board, sand, hearth brick, and dome sections) on top of the wire, and then pulled the wire up & over the insulation blankets. The Chicken wire was cut and pulled together so it was as tight and flat as possible over the insulation. After securing the chicken wire with lots of wire ties, the initial plaster was applied. After the plaster set, we cut the few exposed wires (across the oven opening--seen in the second picture). After several curing fires, the oven's exterior was finished with a colored stucco. I hope these pics will supplement the instructions from the Forno Bravo kit.

It's a great adventure and fun hobby...let the games begin!
Attached Thumbnails
Casa2g90-dsc04986.jpg   Casa2g90-dsc05034.jpg   Casa2g90-dsc05044.jpg   Casa2g90-dsc05050.jpg   Casa2g90-stuccofinish.jpg  

__________________
Mike Stansbury
Roseburg, Oregon (
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
)

Photo albums

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Casa2G90 Dome Assembly: mortar on the what? ccgus Modular Refractory Oven Installation 0 08-01-2012 02:31 PM
detailed build pics Casa2g90? skinnydoc Modular Refractory Oven Installation 5 10-29-2011 02:40 PM
Curing Casa2G90 kirakat Firing Your Oven 6 07-24-2011 07:50 AM
Casa2G90 - Getting Ready, Stucco Questions badlemur Modular Refractory Oven Installation 2 10-27-2010 11:20 AM
Hearth Component Question - Casa2G90 badlemur Modular Refractory Oven Installation 3 04-28-2010 08:08 AM


All times are GMT -7. The time now is 05:57 PM.

Powered by vBulletin® Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
2006/10 Forno Bravo, LLC