Go Back   Forno Bravo Forum: The Wood-Fired Oven Community > PhotoPlog

  Toggle Photo Gallery Navigation

Toggle Enclosure - slate roof done
Click to view original

Toggle Information
Posted By Greg in RI [Profile] [Photo Gallery]
Category Enclosure
Title slate roof done
Description I used slateroofcentral.com for all the information I needed to do the job. I found some reclaimed slate I got for $1.50 a piece. I used about 150 pieces to complete the roof, including the ridge. I screwed to cedar (attached to the roof) as the roof sheathing I used is Hardi cement board. The stainless peak flashing I bought from a chimney company. The most expensive piece of the whole entire project. I had to make my own storm collar as the one that came with the flashing was too large and the vendor wouldn't replace for a smaller size (although I know they sell them).
Original Filesize 273.1 KB
Original Dimensions 1024 x 768
Date Posted 07-30-2013 05:44 PM
Number Of Views 281

All times are GMT -7. The time now is 12:46 PM.

Powered by vBulletin® Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
2006/10 Forno Bravo, LLC