Go Back   Forno Bravo Forum: The Wood-Fired Oven Community > PhotoPlog

  Toggle Photo Gallery Navigation

Toggle Dome and Floor - The oven floor and first 2 courses
Click to view original

Toggle Information
Posted By Mr Meema [Profile] [Photo Gallery]
Category Dome and Floor
Title The oven floor and first 2 courses
Description The floor and first two courses of brickwork proved relatively straight forward and using arch angle refractories did help. The problem is now I'm up to near the top, every brick needs a cut or even several cuts.

I wondered if someone can advise on the chimney part.
I need to take this over the dome and go from the door mouth to about the centre of the dome and then straight up. Is it OK to simply direct the chimney using refractories supported by the dome itself and then a 2 1/2 ' x 6" pipe up out of my roof section???

Thanks in advance for any advice.

Mr M.
Original Filesize 701.8 KB
Original Dimensions 2592 x 1944
Date Posted 06-20-2013 04:52 AM
Number Of Views 943

All times are GMT -7. The time now is 11:47 PM.

Powered by vBulletin® Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
2006/10 Forno Bravo, LLC