| Pizza Ovens | (800) 407-5119 | Info@fornobravo.com |
| |
|
#1
07-16-2005, 06:49 PM
| ||||
| ||||
 proper size of vent opening has anyone figured out a ratio for the diameter of the oven to the size of the vent opening? i have a 42" floor, and my vent opening can be up to 18" wide. any suggestions for the depth of the opening? optimal with my design would be 12" x 6", but i'm not sure if this will draw well enough.
__________________ -paul overdo it or don't do it at all!      |
|
#2
07-18-2005, 02:35 AM
| |||
| |||
| 12x6 will be fine -- that's about what mine is (I used a 13x9 clay flue which has rounded corners so the vent actually tapers into something more along the line of 12x6 before entering the flue as I didn't round the corners of the steel). It's about 3' tall. An 8" diameter chimney is also a good size and matches pretty standard stove chimneys so they're readily available. Jim |
Linear Mode
