#1  
Old 06-10-2014, 01:13 PM
Serf
 
Join Date: Jun 2014
Location: aberdeen n.j.
Posts: 2
Thumbs up flue vent

i am building a brick oven in the igloo shape but i would like the chimney in the center,can i form a 2 inch x 4 inch steel manifold to the shape of the oven,an then cover it in bricks to put the chimney in the center?
Reply With Quote
  #2  
Old 06-10-2014, 07:04 PM
Administrator
 
Join Date: Jul 2008
Location: USA
Posts: 109
Default Re: flue vent

Take a look at this photo link.

PhotoPlog - Vent and Chimney

This is the form we use to center the chimney on our Napolino, Napoli and Vesuvio style ovens.

We modify the vent landing on the front casted dome and install the form. Then we secure the anchor plate to the top center and pour High Temp Mortar into the channel.
v12spirit likes this.
Reply With Quote
  #3  
Old 06-11-2014, 11:54 AM
Serf
 
Join Date: Jun 2014
Location: aberdeen n.j.
Posts: 2
Default Re: flue vent

thank you for the pic. and the information ,i'm going to try this in stainless steel and see if it works.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Questions Re Attaching Terracotta Flue Behen Pompeii Oven Construction 4 07-14-2013 10:05 AM
Vent transition for clay flue liner azatty Design Styles, Chimneys and Finish 16 07-24-2012 09:11 PM
flue and vent opening briot Design Styles, Chimneys and Finish 12 08-11-2010 06:11 AM
"external" flue vent Stumpt Pompeii Oven Construction 0 07-24-2010 05:09 AM
Vent opening up to Flue Adjustment tdibratt Pompeii Oven Construction 0 08-23-2008 05:29 AM


All times are GMT -7. The time now is 05:48 PM.

Powered by vBulletin® Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
© 2006/10 Forno Bravo, LLC