Depth of Landing and vent arch
I am in the design stage of my oven. I am looking to build an 850mm diameter oven.
Most I have seen have a landing and vent arch that seems to be one or one and a half brick lengths deep, with a 4-6" flue. All of these, without exception, have smoke stained fronts, so I guess the flue size is too small.
From my reading I believe I should have an 8" flue. To do this would involve extending the depth of the vent arch and landing.
Is that a problem? The only drawback I can see is having to lean further into the oven to light the fire.
Also I would like to make a masonry chimney, rather than steel.
Any advice is most welcome.
|Thread||Thread Starter||Forum||Replies||Last Post|
|Fireplace in my extended vent landing area||ThermoJax||Outdoor Fireplace Design||2||10-28-2010 05:40 PM|
|can the vent landing & outer arch be normal brick||ThermoJax||Design Styles, Chimneys and Finish||2||10-25-2010 09:39 AM|
|Vent, Arch and landing materials||wemme||Newbie Forum||15||05-24-2010 05:37 PM|
|brick thickness for top of landing arch||waynebergman||Pompeii Oven Construction||2||11-28-2007 10:29 AM|
|Help with vent landing size||gjbingham||Pompeii Oven Construction||3||10-22-2007 09:18 AM|
All times are GMT -7. The time now is 08:55 AM.
Search Engine Friendly URLs by vBSEO 3.6.0
© 2006/10 Forno Bravo, LLC