#1  
Old 04-15-2014, 09:54 AM
Serf
 
Join Date: Jan 2014
Location: NY
Posts: 8
Default New 42" build in NY

Finally! after 2 years of reading on the Forum I have started my new 42" oven build. I built the base for oven 7 x 6.5 ft. and added 2 prep areas 3ft by 21 inches. I made it so there is a walk in are to get to the oven. I just finished adding concrete to the cinderblock with rebar and starting the framing for hearth slab. I added a large angle iron in the middle for support that the hearth slab gets poured right onto. Please give any input or suggestions!

Thank you,
Chris
Attached Thumbnails
New 42" build in NY-20140331_181005_resized.jpg   New 42" build in NY-20140406_134655_resized.jpg   New 42" build in NY-20140406_151135_resized.jpg   New 42" build in NY-20140410_150458_resized.jpg   New 42" build in NY-20140410_150503_resized.jpg  

Reply With Quote
  #2  
Old 04-15-2014, 10:05 AM
Apprentice
 
Join Date: Mar 2011
Location: Bucks County, PA
Posts: 220
Default Re: New 42" build in NY

Looks like you are thinking this through nicely. You aren't messing around with strength. Very robust!

One thing that I wish I had done when building my oven was to split the base into "Two rooms" and put an additional wall across the center (where your angle iron is) and add another doorway either on the side or in the back. This would give support as well as make the storage underneath more useable. Right now, my storage area, only the front get used effectively....to get to the back, you have to get on your knees and crawl back there.
Reply With Quote
  #3  
Old 04-15-2014, 10:21 AM
Serf
 
Join Date: Jan 2014
Location: NY
Posts: 8
Default Re: New 42" build in NY

thank you...I think I'm going to make a unit underneath for the wood that can slide in and out like a pull out cabinet. Like you said, try to get more use for the space
Reply With Quote
  #4  
Old 04-16-2014, 09:27 PM
Novaslo's Avatar
Apprentice
 
Join Date: Dec 2013
Location: Paso Robles
Posts: 127
Default Re: New 42" build in NY

You are on your way....you are going to laugh when you see the similarity in our builds. I will be watching your progress. Good luck!!
Reply With Quote
  #5  
Old 04-16-2014, 09:30 PM
Novaslo's Avatar
Apprentice
 
Join Date: Dec 2013
Location: Paso Robles
Posts: 127
Default Re: New 42" build in NY

I am learning from the suggestions and thinking about using a rolling pull out for my wood storage...just not sure how to pull it off. I am like everyone else, designing with the wood access in the front, rather than on the side.
Reply With Quote
  #6  
Old 04-17-2014, 05:40 AM
Serf
 
Join Date: Jan 2014
Location: NY
Posts: 8
Default Re: New 42" build in NY

I'm trying to figure out how to build a sturdy pull out sled for the wood...but so far no luck on anything that would be sturdy enough
Reply With Quote
  #7  
Old 04-17-2014, 06:07 AM
Journeyman
 
Join Date: Jan 2014
Location: Western North Carolina, USA
Posts: 334
Default Re: New 42" build in NY

Quote:
Originally Posted by clamparillo View Post
I'm trying to figure out how to build a sturdy pull out sled for the wood...but so far no luck on anything that would be sturdy enough
Just a suggestion.....check out Gulf's build. He built what I thought was a very clever and interesting pullout drawer. Not sure if it's what you have in mind, but I thought it may help. Good luck w/it!
__________________
My Build:

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.


"You better cut the pizza in four pieces, because I'm not hungry enough to eat six." - Yogi Berra
Reply With Quote
  #8  
Old 04-17-2014, 06:10 AM
Serf
 
Join Date: Jan 2014
Location: NY
Posts: 8
Default Re: New 42" build in NY

awesome, thanks for the heads up!
Reply With Quote
  #9  
Old 04-17-2014, 06:23 AM
Novaslo's Avatar
Apprentice
 
Join Date: Dec 2013
Location: Paso Robles
Posts: 127
Default Re: New 42" build in NY

Similar stand design-
http://www.fornobravo.com/forum/8/42...a-20497-3.html (42" Pompeii in Paso Robles Ca.)
Reply With Quote
  #10  
Old 04-17-2014, 06:40 AM
Serf
 
Join Date: Jan 2014
Location: NY
Posts: 8
Default Re: New 42" build in NY

that looks great, good job...you have finish pics?
Reply With Quote
Reply

Tags
beginner, new build

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
42" build in Central Texas GarnerAC Pompeii Oven Construction 378 07-22-2014 12:21 PM
Started 42" Build in Fountain Hills, Arizona Gordoni Forum Guidelines 2 02-26-2014 06:06 AM
Rome wasn't built in a day and neither will my oven - 42" Pompeii Oven Build Seattle OceanPizza Getting Started 5 07-10-2013 04:52 PM
Aussie 42" Build - looking for Inspiration!! hammo7 Pompeii Oven Construction 11 10-17-2011 06:26 PM
Upper Valley Of NH 42" Oven Build pduany Brick Oven Photos 6 08-09-2010 03:09 PM


All times are GMT -7. The time now is 07:50 PM.

Powered by vBulletin® Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
2006/10 Forno Bravo, LLC