#1  
Old 10-24-2006, 01:30 PM
Serf
 
Join Date: Oct 2006
Location: Carlsbad, CA
Posts: 2
Default Insulating Hart

Hello all,
I just started this last wknd with the foundation and planning to have the stand complete by Friday. Here is my question: I was reading in the material list that a 50' roll of 8" aluminum flashing is needed for the insulating hart but can not find anywhere where to place it or how to use it. Any suggestions\idea? Further more, are all the bricks used for the dome construction cut in half?
Thank you in advance for your time and respond. Really appreciated.
Reply With Quote
  #2  
Old 10-24-2006, 01:59 PM
james's Avatar
Brick Oven Merchant
 
Join Date: Mar 2005
Location: Pebble Beach, CA
Posts: 4,648
Default You don't need flashing

Nico,
Thanks for pointing this out. The flashing was a thermal test we made a few years ago, which proved to be unimportant. The prototype design had to do with the intersection between the heath and the stand; how hot they both become; and whether you need a slip plane at that point. I will take a look at the Pompeii Oven plans, and make sure that we remove any mention of them. This is something you definitely do not have to worry about.
James
__________________

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
Reply With Quote
  #3  
Old 10-24-2006, 07:52 PM
dmun's Avatar
Moderator
 
Join Date: Jul 2005
Location: New Jersey USA
Posts: 4,216
Default half bricks

The bricks for the dome are cut in half, the bricks for the floor are used whole, except for cuts for the bricks to alternate in the floor patern.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -7. The time now is 02:41 PM.

Powered by vBulletin® Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
2006/10 Forno Bravo, LLC