| Pizza Ovens | (800) 407-5119 | Info@fornobravo.com |
![]() |
| |||||||
| | LinkBack | Thread Tools | Display Modes |
|
#1
| |||
| |||
| For a 43" oven would three rolls of FB insulating blanket be enough or too much? Thanks |
|
#2
| ||||
| ||||
| I built a 42 inch using 2 blankets. It was 2-3 layers thick and a little more in some places. (I also added some vermiculite on top of that) You can't have too much. Les...
__________________ Check out my pictures here: To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. |
|
#3
| |||
| |||
| So two rolls/blankets together gave you 2-3 layers, or 2"-3" overall? |
|
#4
| ||||
| ||||
| Yes. Hopefully other will chime in and we can see their experience. Les...
__________________ Check out my pictures here: To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. |
|
#5
| |||
| |||
| I am planning on adding 6" total insulation on the outside of the oven brick, for a total of 10". I imagine 2" FB blanket plus 4" perlite/cement mix would be about fine. Is this a good ratio? Thanks. Kim |
|
#6
| ||||
| ||||
| Kim - I think you would be happy with that amount. Are you doing a dome or an enclosure? The reason I ask, if it's an enclosure, don't add the portland. Les...
__________________ Check out my pictures here: To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. |
|
#7
| |||
| |||
| Doing a dome. |
| Thread Tools | |
| Display Modes | |
| |
| | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| 6 Lb v. 8 Lb Ceramic Blanket | Gromit | Getting Started | 8 | 07-29-2009 04:39 AM |
| Stucco over Blanket | blacknoir | Pompeii Oven Construction | 2 | 07-21-2009 03:43 PM |
| Vermicrete over Blanket | tdibratt | Pompeii Oven Construction | 4 | 08-22-2008 04:39 AM |
| Insulation Blanket Question | NanyukiTom | Newbie Forum | 5 | 01-01-2008 05:45 AM |
| Insulating blanket question | pjk | Newbie Forum | 9 | 10-08-2007 11:47 AM |