#1  
Old 03-18-2012, 06:07 PM
Peasant
 
Join Date: Mar 2012
Location: mississippi
Posts: 39
Default Dtherr Build in Mississippi

Hello started breaking ground today for my 36 inch oven . Thanks to all who came before me ,there is a a awesome amount of of good advice in this forum.

2 years ago my outdoor kitchen burned to the ground ,faulty propane bottle , I had built it on a wooden deck , and told my wife i would tear it down when i find what will replace it , a friend of mine in Spain sent me the FB plans and after viewing them i was hooked !!

This will be a slow build as I will only be able to work on it in my spare time . I have a ceramic tile installation and concrete countertop business that keeps me busy .

below is photos of the beginning of my build and of my IT i built in 10 min



Total cost to date
(2) 2x6x16
(1) mason string & level
(20) cement blocks
------------------
$45.26
Attached Thumbnails
Dtherr Build in Mississippi-wfo-build.jpg   Dtherr Build in Mississippi-wfo-build2.jpg   Dtherr Build in Mississippi-wfobuild3.jpg   Dtherr Build in Mississippi-wfo-.jpg   Dtherr Build in Mississippi-wfoit1.jpg  

Reply With Quote
  #2  
Old 03-18-2012, 07:18 PM
Gulf's Avatar
Il Pizzaiolo
 
Join Date: Sep 2011
Location: Mississippi
Posts: 1,547
Default Re: Dtherr Build in Mississippi

Welcome to the forum.
Glad to see another Mississipian. Looking forward to following your build.
__________________

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.



To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.



To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
Reply With Quote
  #3  
Old 03-18-2012, 08:09 PM
Peasant
 
Join Date: Mar 2012
Location: mississippi
Posts: 39
Default Re: Dtherr Build in Mississippi

Thanks Gulf , and suggestions on where to get vermiculite and refractory mortar? pool supply store has Pool krete but that has sand in the mix i think , also the brick yard only carries the mortar for inside use .
Reply With Quote
  #4  
Old 03-18-2012, 08:29 PM
Gulf's Avatar
Il Pizzaiolo
 
Join Date: Sep 2011
Location: Mississippi
Posts: 1,547
Default Re: Dtherr Build in Mississippi

I got my vermiculite from Adam's Nursery in Petal. I got FireRock from Boral brick in Hattiesburg. They no longer carry the FireRock. They now stock HeatStop 50. If you can call some of the nurseries in and around Jackson and maybe some of the other brick yards there, it would probably be a little closer. I switched to home brew as soon as I had enough fireclay reclaimed from the wet saw. There might be a source for fireclay in Jackson also. Home brew is a heck of a lot cheaper.
__________________

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.



To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.



To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
Reply With Quote
  #5  
Old 04-24-2012, 02:24 PM
Peasant
 
Join Date: Mar 2012
Location: mississippi
Posts: 39
Default Re: Dtherr Build in Mississippi

Finally!!! got my patio poured , jesh concrete has gotten high total cost of patio 4.25 yds of concrete $537 of course that includes rebar and such .glad i could do it myself in the meantime while i saved for the slab i have located all materials needed for my WFO all locally plus i had a neighbor that has donated 50 blocks he plans to get first pizza out of it which i will surely do .
Attached Thumbnails
Dtherr Build in Mississippi-053.jpg   Dtherr Build in Mississippi-patio4.jpg   Dtherr Build in Mississippi-035.jpg  
Reply With Quote
  #6  
Old 04-24-2012, 02:30 PM
Peasant
 
Join Date: Mar 2012
Location: mississippi
Posts: 39
Default Re: Dtherr Build in Mississippi

@ Gulf ty for the info i found vermiculite and perlite both at same place $16 per HUGE bag
heatstop50 i have located in jackson for $69 per bag and 8# firebrick at $1.30 each
Reply With Quote
  #7  
Old 04-29-2012, 06:29 PM
Peasant
 
Join Date: Mar 2012
Location: mississippi
Posts: 39
Default Re: Dtherr Build in Mississippi

Got blocks laid and filled and hearth is formed ready for me to pour , I estimate 30 / 80# bags should do , apx 1 yard . If i get home from work early this week should only take about 2 hrs to pour. Fingers crossed
Attached Thumbnails
Dtherr Build in Mississippi-100.jpg   Dtherr Build in Mississippi-007.jpg  
Reply With Quote
  #8  
Old 04-29-2012, 07:29 PM
Gulf's Avatar
Il Pizzaiolo
 
Join Date: Sep 2011
Location: Mississippi
Posts: 1,547
Default Re: Dtherr Build in Mississippi

Quote:
Originally Posted by DTHERR View Post
.... should only take about 2 hrs to pour. Fingers crossed ....
Looking good there "home boy" . I do like the looks of a corner build. To be safe figure an hour to get started, an hour to finish and clean up. Just in case, have some lights ready.
The morning that I poured my hearth, I started getting everything ready about an hour before my son arrived at 7:00 am. It took us about 2 hours to pour about the same amount of concrete. I think that I had everything cleaaned up and covered by about 11:00 am.
__________________

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.



To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.



To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
Reply With Quote
  #9  
Old 05-03-2012, 02:23 PM
Peasant
 
Join Date: Mar 2012
Location: mississippi
Posts: 39
Default Re: Dtherr Build in Mississippi

Today i was able to pour hearth . I will let it set over the weekend and start working on the vermiculite/perlite pour surrounded with white portland concrete for the overhang for countertop ,next week. I also have changed from a 36 inch oven may do a 42 or bigger will depend on the size of Landing I will make , any suggestions on the best suited size of the Landing?
Reply With Quote
  #10  
Old 05-04-2012, 05:24 PM
Gulf's Avatar
Il Pizzaiolo
 
Join Date: Sep 2011
Location: Mississippi
Posts: 1,547
Default Re: Dtherr Build in Mississippi

I was holding back, hoping that someone with experience would respond. From what I have gleened from this sight and I will paraphrase several different contributors into one finding. A narrow landing allows you to get closer to working the oven. I think that this would fall under the term Ergonimics.
You are thinking about upgrading to a 42". That means a longer reach into the bowels of the oven. Karangi Dude really got me to thinking about wood placement and fire tending in a large oven. I have a large flu and landing area and thought thought only of using longer peels for turning pizzas . I had not really given much thought to the whole process. You might want to check out his observations of my oven.
Neil2 has an http://www.fornobravo.com/forum/f39/...eck-17629.html (angled flight deck) which allows someone to easily work the oven but still have plenty of work space. There are plenty more great examples out there.
__________________

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.



To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.



To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Cast Refractory Pizza Oven Build abulsamman Other Oven Types 72 09-02-2012 04:05 PM
Oven Build In Central Alabama MetalHead Pompeii Oven Construction 80 08-06-2012 06:04 PM
Pensacola Build rodeair Pompeii Oven Construction 58 03-18-2012 08:52 PM
Wanting to build a wood fire oven the best way we can Wheels1974 Getting Started 9 05-19-2010 07:53 AM
Considering build of Pompeii oven jet Pompeii Oven Construction 21 05-10-2008 12:14 AM


All times are GMT -7. The time now is 06:14 PM.

Powered by vBulletin® Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
2006/10 Forno Bravo, LLC