Go Back   Forno Bravo Forum: The Wood-Fired Oven Community > Pizza Oven Design and Installation > Pompeii Oven Construction

Like Tree1Likes

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 07-27-2014, 01:47 PM
Laborer
 
Join Date: Dec 2013
Location: Denmark
Posts: 50
Default Danish 37" WFO build - Beginner!

Hi,

Long time since my last post. but there has been done some progress on my WFO. And i have also been a lot wiser the past 6 month since my last post in this thread. My build is a 37"

A project that started out, at least in my head, to be over with in a couple of month, and yet I'm just finished the insulation layer.

I attached some pictures for you to look at. ( I have taken a ton of pictures, just don't want to bore you with all of them, so ask if you need different angle etc, maybe i got it )

Please comment on what you thinks good/bad. ATM Im strangely not having any questions for anything. Maybe i have read to much, i doubt it. however if something comes up, ill post it, if i don't find a reasonable solution my self

The weather in Denmark is very "unstable" so its raining a lot, so i put up a cheap tent for cover, however the last 4 weeks we have had a head wave over whole scandinavia more or less. so its been so warm here.. love it But then it gave me shade for working

The countertop I'm kinda proud off First go on it, and have never tried anything near this before. However, i have polished with beeswax, and ??? Is this it, what are you using for keeping moist etc out ?

Tomorrow I'm starting at work after 2 weeks holiday, but I'm going to cut the oven base so it fits when the insulation layer is dry enough to continue to the first course of firebricks.

I made the insulation layer of perlite and portlant cement. ration 1/8 - and finding it very porous ?

----------------
Hmm it says i don't have any rights to upload any pictures. so i shared a folder with google. - trying to fix it though.

https://drive.google.com/folderview?...Tg&usp=sharing

Its me with the green cap ;-)

Cheers
__________________
Follow my build:

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

Last edited by Madsen; 07-27-2014 at 01:54 PM.
Reply With Quote
  #2  
Old 07-27-2014, 03:39 PM
deejayoh's Avatar
Il Pizzaiolo
 
Join Date: Jul 2010
Location: Seattle
Posts: 1,380
Default Re: Danish 37" WFO build - Beginner!

Countertop (and the rest of the patio) looks good. I am curious, how much insulation are you putting between the cement and the oven floor?

Also - is that a dike behind the house?
__________________

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
Reply With Quote
  #3  
Old 07-27-2014, 11:41 PM
Laborer
 
Join Date: Dec 2013
Location: Denmark
Posts: 50
Default Re: Danish 37" WFO build - Beginner!

Morning Deejay.

Yeah and no. Maybe some language diffrences here. but a dike in my English is when you have water on the outside ? In my back garden its a dike that hides the noise from the street behind it But its a new house so the trees etc hasnt grown up yet.

The insulation layer is just shy of 4 inch thick. With that said, its also only 2 days since the perlite pour, maybe that has something to do with the porous insulation layer.
Its maybe not the best Picture of the insulation layer, but there is a small form behind the firebricks. so they only act as a weight to keep the form in place - it was what I had laying around the garden

Straight on top of the perlite I will put fireclay and the the firebrick itself ?
__________________
Follow my build:

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
Reply With Quote
  #4  
Old 07-29-2014, 11:45 AM
Journeyman
 
Join Date: Mar 2011
Location: Bucks County, PA
Posts: 277
Default Re: Danish 37" WFO build - Beginner!

Your concrete countertop looks fantastic! You must have spent a lot of time polishing it. I also admire your overall workmanship on the patio. I am curious if you have any drainage issues with your patio.
Reply With Quote
  #5  
Old 07-29-2014, 02:14 PM
Laborer
 
Join Date: Dec 2013
Location: Denmark
Posts: 50
Default Re: Danish 37" WFO build - Beginner!

Hi jeep!
Thanks for the kind words, appreciate it. I bought the house with my gf two years ago. And back then I had little to none experience in this kind of work, back then it was alcohol and hanging with friends. But once you start a family (got a 1,5 yo daughter) you have to prioritize a little.

All you see in the photos are a first for me ! And I'm somewhat pleased

The countertop I used a whole day of polishing! From grit 20 up to 1200... Phew my arms where shaking some time afterwards but for the first time, with only 1 small 10x10 inch test I'm pretty happy with it

New pictures added just now of the build - link below.
__________________
Follow my build:

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
Reply With Quote
  #6  
Old 07-29-2014, 02:23 PM
Laborer
 
Join Date: Dec 2013
Location: Denmark
Posts: 50
Default Re: Danish 37" WFO build - Beginner!

Jeep,

To your question about the drainage - it works perfect! What you don't see in the pictures is that I have crossed some coarse stones wrapped in some kind of blanket and made them go into the the corner where I have a large pipe with a lot of stones. I don't know all the English words for this but I think you understand
In Denmark during the fall we receive large amount of water so it has to work.

If everything fails, I got a large water pump to help me

Tomorrow I'm going to make the IT. However still not convinced how - but I have some ideas it's not easy when we don't have the same stores like all of you "over there" which means I need to research my self
__________________
Follow my build:

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
Reply With Quote
  #7  
Old 07-29-2014, 05:06 PM
boerwarrior's Avatar
Journeyman
 
Join Date: Apr 2013
Location: Santa Rosa, CA
Posts: 448
Default Re: Danish 37" WFO build - Beginner!

it's looking great, Madsen!

Unless it's too late, you may want to slant the bricks on the landing as well, so that you the metal peel doesn't "stick" when you slide it into the oven. If it is too late then don't worry!

Neil
Reply With Quote
  #8  
Old 07-29-2014, 09:24 PM
Laborer
 
Join Date: Dec 2013
Location: Denmark
Posts: 50
Default Re: Danish 37" WFO build - Beginner!

Neil,

No it's not to late, thanks for the advice. I also considered to do it my self ..
But it should only be the once on the landing ?

Madsen
__________________
Follow my build:

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
Reply With Quote
  #9  
Old 07-30-2014, 07:08 AM
boerwarrior's Avatar
Journeyman
 
Join Date: Apr 2013
Location: Santa Rosa, CA
Posts: 448
Default Re: Danish 37" WFO build - Beginner!

Madsen

your floor is much nicer than mine! But here is what I did.
Attached Thumbnails
Danish 37" WFO build - Beginner!-pizza-floor-brick-layout.jpg  
Reply With Quote
  #10  
Old 08-06-2014, 12:25 AM
Laborer
 
Join Date: Dec 2013
Location: Denmark
Posts: 50
Default Re: Danish 37" WFO build - Beginner!

Some progress has been made the last couple of days, you can have a look at my Pictures in the Photo link in my signature.
(I'm typing from Work, and here we have a stupid system that docent allow me to upload any Pictures from my drive, hence the link)

however second course and the inner arch is done, and I'm just started on the 3rd course. I don't know what happened to the joints, I guess its the smaller circle that doesn't allow me to bond the stones as they should, but i found out a bit late, and chose to make it anyway, because actually besides the structural advantage they give they have actually nice symmetry. That was the last time i place them with mortar prior to dry-stack them.

I'm beginning to Count days before i get the final stone cut in my dome. Hopefully this coming weekend i can finish the dome, so i can Work on the vent and outer arch/landing... And start a fire-that-hardly-can-burn-a-smurf size.. Love it !

The tent i have put up around is really helping me out, i can leave the tools out so its really only to plug in the power for the radio and saw and im ready to build.
Also we have had the last 5-6 weeks about 85-90 degrease fahrenheit (which is not normal in Denmark) so it protects me from the sun
The best part is that it only costs 15 usd ! But we have alot of Wind here on the West coast of Denmark (im Living in Esbjerg) so its about 10% duck tape.

What is that item called you place on top of the vent area that holds the chimney in place ? i have seen alot of Pictures but have no idea what its called. hope you know which one im talking about.

Now, back to "real" work
__________________
Follow my build:

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Modified 3G Masterly Tail Build Mitchamus Other Oven Types 116 10-13-2014 02:27 PM
Build in Thailand mmissler Getting Started 5 02-23-2014 09:17 PM
Primavera (style) Stand - Where to buy or build? PizzaAndBeer Getting Started 0 02-11-2014 08:43 AM
Near completion, Pompeii build Jed Brick Oven Photos 5 05-28-2008 09:48 PM
Considering build of Pompeii oven jet Pompeii Oven Construction 21 05-10-2008 12:14 AM


All times are GMT -7. The time now is 04:27 AM.

Powered by vBulletin® Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
2006/10 Forno Bravo, LLC