#1  
Old 11-27-2006, 06:41 AM
Peasant
 
Join Date: Nov 2006
Location: woodmere NY 11598
Posts: 43
Default captain: the harth is done.

I finished the harth on saterday and all went well I am taking photos of all the steps as well as keeping a log I am just not to good with the computer yet but I will post all. The mixture of the vermiculite went rater well can some one tell me how hard that will get I remember seeing that some one was concerned about fastining the framing for the encloser and I am a little concerned as well. Also I cadalievered the harth over the stand about 8 inches thinking this might look nice as well as add a little more work space but it looks like I my have a problem with reaching into the dome to light fire and clean out ash does any one have any ideas on that other wise I am getting excited on starting the actual oven. Thanks again for all the info.
Reply With Quote
  #2  
Old 11-27-2006, 07:09 AM
jengineer's Avatar
Master Builder
 
Join Date: Aug 2005
Location: Garden-A, South California
Posts: 572
Default

Starting a fire - look for postings by MUSA. I think he used a modified flame thrower.

Cleaning out the ash - Look in the on-line store section of FB they have a rake with a long hendle that will work nicely.

A link to the rake is...
http://fornobravo.com/store/product....cat=249&page=1
Reply With Quote
  #3  
Old 11-27-2006, 07:23 AM
james's Avatar
Brick Oven Merchant
 
Join Date: Mar 2005
Location: Pebble Beach, CA
Posts: 4,648
Default

You know you are getting closer when you start thinking about cooking -- not about all the concrete dust.

I have missed Robert's postings -- I wonder what he's up to. It was a result of his flamethrower videos that I started using a propane torch to start lighting my oven.


James
__________________

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
Reply With Quote
  #4  
Old 11-27-2006, 02:42 PM
maver's Avatar
Master Builder
 
Join Date: Aug 2006
Location: Puyallup, WA
Posts: 571
Default starting fire

Try building the fire in the vent area and pushing it back - I usually arrange a few larger wood pieces with some newspaper in the oven before this, but you could reverse it - start a smaller fire, push it back, add some smaller pieces to build a good flame and then start adding bigger pieces.

As far as starting with propane, I have not had any trouble starting with match and a little newspaper since I started kiln drying my wood with the residual oven heat after I am finished with baking. Well dried wood starts ridiculously easily. In our wet Pacific Northwest I was unaware what dry wood was like before starting this technique.
Reply With Quote
  #5  
Old 11-27-2006, 09:33 PM
Laborer
 
Join Date: Apr 2006
Location: Austin, Texas
Posts: 96
Default

I seem to be at the same stage as you are! I'll be laying the hearth bricks tomorrow, as soon as I get a notched trowel.

The perlite/cement has set up very well, I poured it about a week ago. However, the surface is brushing off in some places. I suspect this is because I sprayed it a little to aggresively too keep it from drying too quickly, and I rinsed off the cement! I still don't think anchors will hold well, so I'll have to develop my strategy as it's time to finish the oven.

-Chris
__________________
-Chris-
I'm building a Pompeii Oven in Austin, Texas. See my progress at:

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
Reply With Quote
  #6  
Old 11-28-2006, 06:19 AM
Peasant
 
Join Date: Nov 2006
Location: woodmere NY 11598
Posts: 43
Default captain

I will be away for a week so all will be on hold. Last night I striped the forms from the hearth and every thing realy came out great, in fact I laid out the oven floor bricks in a herring bone pattern just to see how it will look, I am realy geeting excited.The candeleiver is not as bad as i thought with the forms out of the way I think it will be fine. What type of wood do you find to be the best to use. Thanks again for all the info.
Reply With Quote
  #7  
Old 11-29-2006, 03:04 AM
james's Avatar
Brick Oven Merchant
 
Join Date: Mar 2005
Location: Pebble Beach, CA
Posts: 4,648
Default Looking forward to the fire

Captain,
You can burn almost any mid to heavy grain wood. Oak and fruit/nut woods are all very good. Don't burn pine, cedar and fir -- as they are sappy and soft, put out a lot of black smoke, and don't add much to the fire heat. You might also want to avoid Eucalyptus because of the sap and popping.

Lot's to look forward to.
James
__________________

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
Reply With Quote
  #8  
Old 11-29-2006, 12:23 PM
Peasant
 
Join Date: Nov 2006
Location: woodmere NY 11598
Posts: 43
Default captain

chris i am looking at you site and it looks like little italy in ny am i right if it is we might know each other. good luck with your oven i will be away for 5 days so cant do much. I just striped my form and all came out real good and is curring nicely. Keep in touch
Ronnie
Reply With Quote
  #9  
Old 11-29-2006, 12:53 PM
Laborer
 
Join Date: Apr 2006
Location: Austin, Texas
Posts: 96
Default

The banner graphic on my blog is just the default one that wordpress put up there! It seemed to fit well enough that I haven't bothered to change it yet.
__________________
-Chris-
I'm building a Pompeii Oven in Austin, Texas. See my progress at:

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
Reply With Quote
  #10  
Old 02-17-2013, 10:16 PM
SpottedFrog's Avatar
Laborer
 
Join Date: Feb 2013
Location: Australia, Bathurst NSW
Posts: 61
Default Re: captain: the harth is done.

Regards wood James eucalyptus works pretty well out here in Oz.
__________________
Cheers,
Rosemary

My build so far

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.


Starting out collecting info and materials

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -7. The time now is 08:47 AM.

Powered by vBulletin® Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
2006/10 Forno Bravo, LLC