| Pizza Ovens | (800) 407-5119 | Info@fornobravo.com |
| |
|
#1
04-09-2007, 04:38 PM
| |||
| |||
 captain; cracks in vermiculit Hope every one is good I just opened the oven up for the season and noticed some cracks in the top coat of vermiculite I fired it up and was getting some heat loss before I put my finising coats of stucco what can I use to fill crack or should I channel out cracks and fill with vermiculite . Thanks for any help      |
|
#2
04-09-2007, 05:28 PM
| ||||
| ||||
| Re: captain; cracks in vermiculit Captain, Personally, I'd cut them out and back in a V-shape and refill with your vermic mix. Try to get to the depth of the crack and go wider than you think you have to. Mix a bit on the wet side and really press it in with a trowel. Let dry thoroughly. Should work. Cheers, Jim
__________________ "Made are tools, and born are hands"--William Blake, 1757-1827 |
|
#4
04-09-2007, 06:20 PM
| ||||
| ||||
| Re: captain; cracks in vermiculit Captain, Whoops. One more thing. Use an old paint brush dipped in water and wet up the Vs a bit before you apply the fresh mix. You'll get better stick that way. Jim
__________________ "Made are tools, and born are hands"--William Blake, 1757-1827 |
 |
| Thread Tools | |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Help Cracks in Oven | mrpbjnance | Modular Refractory Oven Installation | 6 | 07-21-2007 09:20 AM |
| Captain | captain | Pompeii Oven Construction | 0 | 11-14-2006 12:40 PM |
| Cracks in newly fired oven | Davy | Getting Started | 4 | 05-30-2006 03:07 PM |
| Dome cracks | Yahoo-Archive | Pompeii Oven Construction | 3 | 04-26-2005 09:21 AM |
| Small cracks in vent | Yahoo-Archive | Design Styles, Chimneys and Finish | 0 | 03-19-2005 03:38 PM |
Linear Mode
