#1  
Old 07-25-2006, 02:34 PM
Laborer
 
Join Date: Apr 2006
Location: Upland, Ca
Posts: 76
Default 4th course and Angle Iron

I saw a few threads on this but I didn't seem to get a definite answer
Instead of doing the 4th course of bricks with the angle iron can we
just leave the opening of the wood section open (no arch or anything)
and just have the hearth slab span the opening. Will that be strong enough?
Has anyone done this without extra support such as tubing?
Would rebar be ok?
Reply With Quote
  #2  
Old 07-26-2006, 07:15 AM
DrakeRemoray's Avatar
Il Pizzaiolo
 
Join Date: Mar 2006
Location: Littleton, CO
Posts: 1,211
Default

When you say 4th course of brick, do you mean 4th course of cinderblock? If you are talking about spanning the wood storage area of the stand, then I did this, you can see it pretty well here:


I poured my walls instead of using cinderblock. Also, I am planning on framing it out so that the entrance to the wood storage is not sooo big.

Hope this helps.

Drake
Reply With Quote
  #3  
Old 07-26-2006, 07:35 AM
Laborer
 
Join Date: Apr 2006
Location: Upland, Ca
Posts: 76
Default

Thanks Drake,
That is exactly what I was looking for.
Framing it out and possibly putting a door on it is a good idea.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -7. The time now is 03:43 PM.

Powered by vBulletin® Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
2006/10 Forno Bravo, LLC