Seal Dome to Hearth?
Hello all! I've been doing a lot of reading around here, now it's time for some questions on installing my 1st pizza oven. Let me start w/this one;
I've acquired a 2 pc dome oven; 1 piece hearth & 1 pc dome... inside dims: 28" dia x 12.5" H. The dome sits on top of the hearth. In the reading I've done, seems that the dome is typically not sealed to the hearth. The instructs for this particular oven call for the dome to be shimmed up 1/4" and refractory mortar be used to seal this gap. It makes sense to me... except that everything else I've read calls for not doing this. I feel almost foolish questioning the manufacturer but can anyone shed some light my direction? I will also be using ceramic blanket to cover the dome... seems that sealing everything would also prevent any of this fiber from working its way inside the oven.
|Thread||Thread Starter||Forum||Replies||Last Post|
|Hearth and Dome construction questions||asparapani||Pompeii Oven Construction||16||12-11-2008 05:05 PM|
|Thermal Expansion Question - Dome vs Hearth||Kemo||Pompeii Oven Construction||14||10-03-2007 12:18 PM|
|Space between hearth floor and dome wall?||johnrbek||Pompeii Oven Construction||8||03-26-2007 11:10 PM|
|Dome to Hearth Ratio's||Xabia Jim||Getting Started||4||03-09-2007 09:20 AM|
|hearth done - brick floor and dome next||boccu||Pompeii Oven Construction||4||01-07-2007 09:19 PM|
All times are GMT -7. The time now is 04:47 PM.
Search Engine Friendly URLs by vBSEO 3.6.0
© 2006/10 Forno Bravo, LLC