#1  
Old 01-17-2011, 10:39 PM
Serf
 
Join Date: Feb 2010
Location: SO CAL
Posts: 18
Default Cracked hearth- Casa 2G 90

Hello,

I have owned the Casa2g 90 for about 6 month, and used the oven for about 15 times. I noticed the hearth had 2 long cracks and wanted to see how bad it was. I removed the tiles, which were heavy , but noticed that the cracks ran the backside of it.

Most people on the board say small cracks in the oven walls are normal, which I have but it hasn't caused any problems. Is this OK for the floor tiles?

I have my oven on a stainless steel stand with casters that moves back and forth about 30 feet. Basically from under the patio to outside, to clear the chimney and not cook dangerously under the patio cover. I dont think moving an oven would cause the tile to crack.

Also I noticed that the heat under the stainless plate, the metal gets quite hot. I wonder if the heat is leaking out? I am using the 2" insulation board supplied with the Casa2g oven.

The 2 images below are 1 side of the tile




This image is of the other tile that is cracked, but isnt as bad and doesnt run all the around the backside.

Reply With Quote
  #2  
Old 01-17-2011, 10:41 PM
Serf
 
Join Date: Feb 2010
Location: SO CAL
Posts: 18
Default Re: Cracked hearth- Casa 2G 90

Bottom side of oven stand
Reply With Quote
  #3  
Old 01-18-2011, 02:18 AM
david s's Avatar
Il Pizzaiolo
 
Join Date: Mar 2007
Location: Townsville, Nth Queensland,Australia
Posts: 4,699
Default Re: Cracked hearth- Casa 2G 90

The larger any refractory pieces are the more inclined they are to crack, particularly floor sections.
Reply With Quote
  #4  
Old 01-18-2011, 06:12 AM
Peasant
 
Join Date: Apr 2008
Location: nevada
Posts: 37
Default Re: Cracked hearth- Casa 2G 90

I would assume you constructed you oven as light as you could since you move it around. It looks to me like you set the oven deck on the FB board only, can you provide me with more info on floor install.
Mike
Reply With Quote
  #5  
Old 01-18-2011, 01:37 PM
Serf
 
Join Date: Feb 2010
Location: SO CAL
Posts: 18
Default Re: Cracked hearth- Casa 2G 90

"david s"- i guess i never thought about that. but doesnt some of the mobile wood fired ovens , such as The Fire Within, use Forno bravo ovens with multiple floor pieces? I remember seeing them at last years FB Expo.

"PIZZAMANMIKE"- The oven assembly consists of the stand and FB oven. I would say the stand is about 300 lbs. I used a mix of 304 stainless steel square tubing in various size, and stainless steel plate on top.

The insulation board sits on top of the stainless plate. Then the sand goes over the board, as mentioned in the FB install book. Next went the hearth cooking floor.

I welded 2" angle iron around the perimeter of the oven so it would not move around while being pushed.

How strong are the tiles from cracking? Any experience from Casa 2G owners?
Reply With Quote
  #6  
Old 01-19-2011, 12:47 AM
Serf
 
Join Date: Feb 2010
Location: SO CAL
Posts: 18
Default Re: Cracked hearth- Casa 2G 90

Is there anybody from the FB staff that can give me any insight or recommendations?
Reply With Quote
  #7  
Old 01-19-2011, 04:51 AM
Journeyman
 
Join Date: Aug 2010
Location: MN, USA
Posts: 346
Default Re: Cracked hearth- Casa 2G 90

Quote:
Originally Posted by d0rifto View Post
Is there anybody from the FB staff that can give me any insight or recommendations?
You should call them/ email them directly as I don't know if they check the board regularly.

The cracks don't look like anything I'd be worried about. Everything is relative though. What is big to one, is small to another.
__________________
My oven (for now):

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
Reply With Quote
  #8  
Old 01-19-2011, 05:06 AM
dmun's Avatar
Moderator
 
Join Date: Jul 2005
Location: New Jersey USA
Posts: 4,216
Default Re: Cracked hearth- Casa 2G 90

I'm confused by your pictures. You took your oven apart to photograph the crack?
Quote:
Also I noticed that the heat under the stainless plate, the metal gets quite hot. I wonder if the heat is leaking out? I am using the 2" insulation board supplied with the Casa2g oven.
Usually when an oven is leaking heat despite being properly insulated the culprit is wet insulation. It may be that your stainless base plate, being much more conductive of heat, may seem hotter, quicker than a conventional concrete support slab. All that heat has to go somewhere.
__________________
My geodesic oven project:
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
,
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
Reply With Quote
  #9  
Old 01-19-2011, 11:02 AM
james's Avatar
Brick Oven Merchant
 
Join Date: Mar 2005
Location: Pebble Beach, CA
Posts: 4,648
Default Re: Cracked hearth- Casa 2G 90

Hi d0rifto,

Sorry that you have a crack in one of your floor tiles. We have shipped many thousands of floor tiles and a thin crack like this is very rare. We have seen it only a couple of times. It turns out that 18"x18" is an optimal floor tile size for larger ovens, where there are few seams and very little hairline cracking. Cast monolithic floor are much more likely to crack.

Still -- you have a crack.

Looking at your floor piece, it does not appear that it is going to be a problem. It is not the source of any heat loss through the bottom of the oven, and when you place it back in the oven there is a very good chance that the floor pieces will never change and never be a problem. Of course if you have any problems with the piece, let us know. You can reach customer support on info at fornobravo.com, or 800 407-5119. That is the best way to get service.

On the heat under the oven, I think David's comment is right. There is an amount of heat working its way through the FB Board, and unlike concrete, the stainless steel is a very good conductor of heat. In the overall context of firing your oven, cooking performance and heat retention, the warm steel has very little impact.

Let us know how it goes, but basically -- keep cooking!

James
__________________

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
Reply With Quote
  #10  
Old 01-19-2011, 01:04 PM
Serf
 
Join Date: Feb 2010
Location: SO CAL
Posts: 18
Default Re: Cracked hearth- Casa 2G 90

dmun- Yes, i took the oven tiles out of the oven. But I did not disassemble the 3 piece oven dome to remove it. It is not too difficult to do, especially since the outside of the oven isnt finished with any tiles, roof, other design. I just had to chip away at the FB mortar that was covering the front base, which was the insulation board, sand, then cooking tiles.

It has the scratch coat over the 3 layer of insulated blanket. Which I must add does a great job of keeping heat in, I do not feel any heat on the exterior of the oven. I just removed the sand then took the tiles out.

The oven tiles never had any cracks when I first used the oven and started to appear after cooking.

I would not be afraid of the cracks if it was only on one side, but 1 of the tiles has it running across the other side. Maybe ill post a video so people can see what it looks like, its kinda hard with pics.

Ill contact FB if it looks like it getting worse or if I need assistance!
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Question about hearth size Casa 2G 110? frankiebones Getting Started 1 08-16-2010 11:53 AM
Casa 2G Modular - Cracked Pieces Chaos Modular Refractory Oven Installation 1 04-26-2010 05:18 PM
Hearth Bread=Hearth Aroma? timo Hearth Bread and Flatbread 18 11-27-2009 03:44 AM
Casa 80 shallow hearth ERASMO Modular Refractory Oven Installation 1 10-27-2009 09:46 AM
Before I pour...hearth question Pizza Freak Getting Started 7 05-21-2008 12:59 PM


All times are GMT -7. The time now is 02:28 PM.

Powered by vBulletin® Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
2006/10 Forno Bravo, LLC