#1  
Old 09-24-2008, 04:35 PM
Serf
 
Join Date: Aug 2008
Location: Burlingame,CA
Posts: 7
Default Chimney Construction question

Hi again,

I got the 4 dome pieces aligned correctly, and now had a question about the 2 chimney pieces.

Do I put refrax between each other and the dome?

Also the piece with the 2 bumps. Do the bumps go in front or the back?

Steve
Reply With Quote
  #2  
Old 09-24-2008, 06:11 PM
james's Avatar
Brick Oven Merchant
 
Join Date: Mar 2005
Location: Pebble Beach, CA
Posts: 4,648
Default Re: Chimney Construction question

Hi Steve,

You are making good progress. The vent piece with the rectangular opening goes on first, with the bumps to the front and the front of the vent lined up with the front (vent area walls) of the oven. I am attaching a couple of photos.

Yes, used Refmix between each layer (oven to vent, vent to round chimney adapter), and use a little Refmix on the outside of the seams to ensure that you have an airtight seal.

Keep going!
James
Attached Thumbnails
Chimney Construction question-azzo-10.jpg   Chimney Construction question-dsc00069.jpg  
__________________

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
chimney question builder brad Design Styles, Chimneys and Finish 4 08-22-2008 12:36 AM
Chimney block question dmun Design Styles, Chimneys and Finish 3 08-11-2007 05:17 PM
Question about oven opening and chimney rwiggim Pompeii Oven Construction 6 08-09-2007 12:16 PM
Chimney / Flue Question.. johnrbek Pompeii Oven Construction 1 02-20-2007 03:07 PM
Construction of Chimney question dmun Design Styles, Chimneys and Finish 0 07-18-2005 08:08 AM


All times are GMT -7. The time now is 03:37 PM.

Powered by vBulletin® Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
2006/10 Forno Bravo, LLC