#1  
Old 06-18-2010, 11:19 AM
Serf
 
Join Date: Apr 2010
Location: Franklin, TN
Posts: 3
Default Casa2G90 - Getting Ready, Stucco Questions

The freight company will be dropping the oven kit off on Monday and I am gearing up to do assembly. My base (pictured) was finished last week.

I understand that water is an enemy until the final coat of stucco goes on, so should I'm planning on tarping if rain interrupts the build. I've read through the instructions several times and I think I've got the assembly down. I'm planning to finish it as a gray igloo.

I'm new to stucco, so is there a primer online worth reading? Products worth recommending? I hear there is a partial vinyl stucco that I should use as the final coat. How long should I wait between coats, how many coats, etc? Any and all stucco advice is appreciated!
Attached Thumbnails
Casa2G90 - Getting Ready, Stucco Questions-pizzabase.jpg  
Reply With Quote
  #2  
Old 06-20-2010, 01:51 PM
Banned
 
Join Date: Feb 2010
Location: Bend, Oregon
Posts: 131
Default Re: Casa2G90 - Getting Ready, Stucco Questions

What we did was after the Ceramic Insulation we wrapped our igloo in chicken wire and tie wired it all together to keep the nice shape. Then we coated it with poormans mortar...... let it dry one day. then next day I use "STO" Stucco then after it dried I put another coat on it. you can look at my build if you want to

Chris
Reply With Quote
  #3  
Old 10-27-2010, 11:20 AM
Serf
 
Join Date: Oct 2010
Location: Kentucky USA
Posts: 4
Default Re: Casa2G90 - Getting Ready, Stucco Questions

Hi Chris, I am getting a Casa 2g90 in the Spring, this winter I will build the stand for it. Can you tell me the exact width and lenght of your 2g90 as it sets on the stand, I am also going to have the brick arch. will this effect the length ? I don't want any over hange. .... Doug
email address driach@fuse.net
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Steel Frame & stucco Questions stchang Tools, Tips and Techniques 1 07-27-2009 06:17 AM
stucco over exisisting smooth stucco michelevit Design Styles, Chimneys and Finish 10 04-29-2009 05:27 PM
Almost Ready to Stucco -FB board question stellawood Modular Refractory Oven Installation 2 10-10-2008 01:05 PM
STUCCO-Part 1: What it is sarah h Tools, Tips and Techniques 0 06-28-2008 02:23 PM
Finally ready for stucco Dan94550 Tools, Tips and Techniques 2 10-23-2007 08:21 AM


All times are GMT -7. The time now is 01:10 AM.

Powered by vBulletin® Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
2006/10 Forno Bravo, LLC