#1  
Old 06-12-2013, 10:20 PM
Peasant
 
Join Date: Apr 2010
Location: Tucson, AZ
Posts: 44
Default design of compact corner stand

I have limited space due to the location. It will be a corner installation, and I will have plenty of counter space to the left, but can't expand too far in the other directions

I will be building a 36" high-vault, walled-enclosure-style, using 8" slump blocks.

I see in the Pompeii instructions pg 17, there is a diagram of a corner installation. The dimensions look like 46"x46" square. Is that the edges of the block stand, or just the hearth, or what?

If I really need 59x70 I may need to re-evaluate

What is the most compact stand you have seen around here?
Reply With Quote
  #2  
Old 06-12-2013, 11:32 PM
brickie in oz's Avatar
Il Pizzaiolo
 
Join Date: Mar 2009
Location: Whittlesea
Posts: 3,455
Default Re: design of compact corner stand

Quote:
Originally Posted by TylerDavis View Post

I will be building a 36" high-vault, walled-enclosure-style, using 8" slump blocks.
Seems fairly high? You need to get the heat down to where the food will be so a lower oven would be better.
__________________
The English language was invented by people who couldnt spell.


To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.



To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
Reply With Quote
  #3  
Old 06-20-2013, 08:13 AM
texman's Avatar
Master Builder
 
Join Date: Nov 2009
Location: Amarillo, Texas
Posts: 587
Post Re: design of compact corner stand

For a 36" interior diameter oven with wall enclosure figure as this:
36" for oven floor
9" for brick dome using half bricks
8" of insulation(depends on material)
8" of wall enclosure

total of 61" wide by 61" deep minimum. You will need an small extension of your base for your vent opening and flu for a corner of at least 10" as well.

Hope that helps. You can always build an oven that will fit the space you have. Dont scrap the plan just because a smaller oven is all you can build.

Texman
__________________
My Progress:

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
Reply With Quote
Reply

« char | K Fac-19 »
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
36" Corner build question - Foundation Size - Block Stand Size jdjr Getting Started 3 03-06-2013 01:34 PM
Soliciting feedback on metal stand for corner install afinpdx Getting Started 0 06-28-2011 12:52 PM
Corner Metal Stand for Casa2G afinpdx Modular Refractory Oven Installation 0 06-17-2011 09:37 AM
42" Corner Design dtrbovich Getting Started 6 10-19-2010 06:04 AM
Stand design modification? stuart Getting Started 6 04-04-2007 10:32 AM


All times are GMT -7. The time now is 08:22 AM.

Powered by vBulletin® Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
© 2006/10 Forno Bravo, LLC