#1  
Old 02-08-2013, 03:48 AM
Laborer
 
Join Date: Feb 2013
Location: Romney, WV
Posts: 80
Default Casa2G90 Base Size

From the dimension sheet for the Casa 90 oven, it shows that the oven kit is 40" wide and 46" deep, without an arch at the door. We're having a base built along with a fireplace and looking at the base being 48" wide, 60" deep, and 42" high. Does this sound right based on the kit size. This gives us a few inches on each side to finish the oven, most likely stucco or tile. The depth of 60" would give us about 6" for a small arch, was told the FB pre-made arch sold for this oven is 4" deep.

Thanks in advance for feedback, look forward to learning more through this forum.

Dave
Romney, WV
Reply With Quote
  #2  
Old 02-08-2013, 02:27 PM
sclancy's Avatar
Laborer
 
Join Date: Mar 2012
Location: Richmond, VA
Posts: 80
Default Re: Casa2G90 Base Size

Dave,

I posted up very similar questions and havent gotten any replies....

http://www.fornobravo.com/forum/f6/o...0-a-18864.html (oversize hearth for Casa 110....)

I am going to call FB and confirm the specs of my Casa before I order. It is hard to tell how much add'l space you need over the precast dimensions for fiber blanket and then stucco or enclosure....I dont want to run out of space on my hearth....

Quote:
Originally Posted by davemartin88 View Post
From the dimension sheet for the Casa 90 oven, it
shows that the oven kit is 40" wide and 46" deep, without an arch at the door. We're having a base built along with a fireplace and looking at the base being 48" wide, 60" deep, and 42" high. Does this sound right based on the kit size. This gives us a few inches on each side to finish the oven, most likely stucco or tile. The depth of 60" would give us about 6" for a small arch, was told the FB pre-made arch sold for this oven is 4" deep.

Thanks in advance for feedback, look forward to learning more through this forum.

Dave
Romney, WV
Reply With Quote
  #3  
Old 02-09-2013, 04:22 AM
Laborer
 
Join Date: Feb 2013
Location: Romney, WV
Posts: 80
Default Re: Casa2G90 Base Size

Thanks for the reply. I had missed it before I posted but there is a sticky at the top of this forum related to Hearth Size that has some good information. I didn't read it prior because I thought it was related to a Fireplace (I know, it's in the Pizza Oven forum so should have looked anyway, lol). From the info in that post, I decided that I need to make the base just a little bit larger than originally planned.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Making my base JakeRhee Getting Started 6 06-17-2011 02:56 PM
Base Block size? PlanoPhil Getting Started 6 05-07-2011 08:07 PM
What oven size for this base scoot1on1 Getting Started 1 02-20-2009 10:24 AM
Base size for a 36" corner installation thebadger Newbie Forum 2 09-14-2007 06:46 PM
Size of Angle Iron for Base tdibratt Pompeii Oven Construction 1 07-14-2005 06:58 PM


All times are GMT -7. The time now is 07:42 AM.

Powered by vBulletin® Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
2006/10 Forno Bravo, LLC