#1  
Old 08-27-2014, 03:41 PM
Serf
 
Join Date: Aug 2014
Location: Australia
Posts: 7
Default WFO's South Coast NSW

Hi All, New to the forum.
Any WFO builders in the South coast of NSW, Wollongong down to Ulladulla and out to the Southern table lands?
Procrastinated over oven location for the past twelve months without resolve, so I intend to build one on a self-supporting structural slab with galvanised steel frame, got the capacity to lift 5 ton. Eventually hope to settle on a permanent location.
Cheers, Darren
Reply With Quote
  #2  
Old 08-29-2014, 12:34 AM
Serf
 
Join Date: Mar 2013
Location: Gold Coast, Australia
Posts: 18
Default Re: WFO's South Coast NSW

Not near you but I'm building mine on my deck ( 1 st storey ). It has a gal frame but I used Hebel powerpanel instead of a concrete slab, a lot easier and you would save a bit of weight probably too.
Reply With Quote
  #3  
Old 08-29-2014, 02:48 AM
david s's Avatar
Il Pizzaiolo
 
Join Date: Mar 2007
Location: Townsville, Nth Queensland,Australia
Posts: 4,759
Default Re: WFO's South Coast NSW

Hope your deck is well supported Seamad
Reply With Quote
  #4  
Old 08-30-2014, 05:18 PM
Serf
 
Join Date: Aug 2014
Location: Australia
Posts: 7
Default Re: WFO's South Coast NSW

Seamad, I'm guessing the Hebel would have better thermal properties as well?
Reply With Quote
  #5  
Old 08-31-2014, 01:47 AM
Il Pizzaiolo
 
Join Date: Jan 2012
Location: Australia
Posts: 1,018
Default Re: WFO's South Coast NSW

It does, still use calsil above the hebel.
__________________
Cheers Colin


To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

Last edited by oasiscdm; 08-31-2014 at 05:39 AM.
Reply With Quote
  #6  
Old 08-31-2014, 06:22 AM
cobblerdave's Avatar
Il Pizzaiolo
 
Join Date: Jan 2010
Location: brisbane australia
Posts: 2,344
Exclamation Re: WFO's South Coast NSW

G'day
Secound what Colin said.
I don't have any other insulation than hebel and my ovens 4 yrs old now, no ill effects . BUT I'll be the first to tell you to be cautious and protect the hebel with some higher temp insulation first.
Regards dave
__________________
Measure twice
Cut once
Fit in position with largest hammer

My Build

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

My Door

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
Reply With Quote
  #7  
Old 08-31-2014, 04:31 PM
Serf
 
Join Date: Mar 2013
Location: Gold Coast, Australia
Posts: 18
Default Re: WFO's South Coast NSW

+1 what the others said. I have ceramic board on top of the
hebel, stuck it on with the hebel adhesive.
Reply With Quote
  #8  
Old 09-01-2014, 02:23 AM
Il Pizzaiolo
 
Join Date: Jan 2012
Location: Australia
Posts: 1,018
Default Re: WFO's South Coast NSW

Ditto seamad but after blowing afl the Crap off and slightly wrong the hebel to create a key.
__________________
Cheers Colin


To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
Reply With Quote
  #9  
Old 09-02-2014, 01:27 AM
Serf
 
Join Date: Aug 2014
Location: Australia
Posts: 7
Default Re: WFO's South Coast NSW

Guys,
Would the best insulation on top of the Hebel be Calcium silicate board @ 50mm thick then 25mm of refractory castable and finally the oven floor bricks.?
Any other ideas ?
Cheers, Darren

Last edited by yellowbox; 09-02-2014 at 01:31 AM.
Reply With Quote
  #10  
Old 09-02-2014, 01:38 AM
Serf
 
Join Date: Mar 2013
Location: Gold Coast, Australia
Posts: 18
Default Re: WFO's South Coast NSW

I just laid my firebricks (75mm thick) on the casi board, no mortar, infact nothing underneath them.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Al's world tour of New South Wales and South Australia. brickie in oz Travel 19 01-24-2014 03:24 PM
Trip South America gmchm Travel 0 12-23-2013 10:46 AM
Materials in Adelaide South Australia Poops Finding Building Materials 7 04-26-2011 02:52 AM
COAL Where to Buy on the WEST COAST 100million Finding Building Materials 2 04-07-2010 04:01 PM
Help! Moist Wood In South Florida! tom di Brick Oven Photos 2 01-24-2009 11:59 AM


All times are GMT -7. The time now is 09:35 AM.

Powered by vBulletin® Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
2006/10 Forno Bravo, LLC