#1  
Old 11-09-2011, 01:18 AM
OscarA's Avatar
Apprentice
 
Join Date: Nov 2010
Location: Melbourne, Australia
Posts: 226
Default Tile adhesive?

Any tips on what tile adhesive to use on the oven bench area. I will be using small 100x100x10 terracotta tiles on the work top and brick tiles/pavers (25mm thick) on the side of suspended slab.
Thanks.. Oscar
Reply With Quote
  #2  
Old 11-09-2011, 01:25 AM
david s's Avatar
Il Pizzaiolo
 
Join Date: Mar 2007
Location: Townsville, Nth Queensland,Australia
Posts: 4,705
Default Re: Tile adhesive?

make sure you use an outdoor adhesive, either acrylic or cement based.
Reply With Quote
  #3  
Old 11-09-2011, 02:25 AM
cobblerdave's Avatar
Il Pizzaiolo
 
Join Date: Jan 2010
Location: brisbane australia
Posts: 2,227
Default Re: Tile adhesive?

gudday oscar

dont forget the grout inbetween the tile......it doesn't have to be the standard white there are heaps of colours avaliable....just a thought

regards dave
Reply With Quote
  #4  
Old 11-09-2011, 05:29 AM
mrchipster's Avatar
Il Pizzaiolo
 
Join Date: Apr 2010
Location: Minneapolis, MN USA
Posts: 1,240
Default Re: Tile adhesive?

Thin set with acrylic additive will work well. Also use the acrylic additive in the grout. It adds some water resistance and flexibility to the thin set and mortar.

The acrylic additive here comes in liquid form and is available in quarts and gallons.

I use it to set tile in my swimming pool and it is under water all summer then frozen to -25 F in the winter. It holds up.

Chip
Reply With Quote
  #5  
Old 11-09-2011, 02:18 PM
OscarA's Avatar
Apprentice
 
Join Date: Nov 2010
Location: Melbourne, Australia
Posts: 226
Default Re: Tile adhesive?

Thanks everyone for your help.

I now have something to work with thinset, acrylic additive, grout, coloring for the grout and a trowel.

Off to Bunnings soon so I'll see what they have.
Reply With Quote
  #6  
Old 11-09-2011, 04:20 PM
scottz's Avatar
Apprentice
 
Join Date: Nov 2009
Location: Perth, Australia
Posts: 161
Default Re: Tile adhesive?

Hey Oscar,
I got some flexible tile glue from bunnings as well as flex grout. It worked a treat. The glue needs to be mixed with water and has a stone look, like plaster with pebbles before you mix it, but it works well. And a quick note on the grout, use darker colours rather than white...easier to clean when working with food. The only other thing I can say is seal the grout when its dry so food and liquard doesnt stain it. Good Luck

Scott
Reply With Quote
  #7  
Old 11-09-2011, 04:46 PM
OscarA's Avatar
Apprentice
 
Join Date: Nov 2010
Location: Melbourne, Australia
Posts: 226
Default Re: Tile adhesive?

Quote:
Originally Posted by scottz View Post
Hey Oscar,
I got some flexible tile glue from bunnings as well as flex grout.

Scott
I ended up getting this stuff

Davco Ceramacrete 20kg - Bunnings Warehouse

I saw the flexible stuff and was leaning towards it but once I spoke to someone at Bunnings I went the cheaper option. The oven bench top is rigid with no movement so the flexible stuff wasn't needed. I asked about additives but was told it wasn't needed and all I need to do is seal the tiles and grout once laid. I have concrete sealer so I'll use that to seal everything once finished.
The adhesive I got says it's suitable for indoors/outdoors and to only avoid using it on areas that will be submerged under water so it sounds fine.

Thanks everyone.
Reply With Quote
  #8  
Old 11-12-2011, 01:42 PM
cobblerdave's Avatar
Il Pizzaiolo
 
Join Date: Jan 2010
Location: brisbane australia
Posts: 2,227
Default Re: Tile adhesive?

Gudday Oscar
I have used the davco before.... depends on the colour of you tile of course but it can be used as a grout. Yep my laundry grouted with it... 2 years now and the pizza oven. So it's not on the instructions ...quess what davco make grout as well which is a lot more expensive than the adhesive.....and the same thing I recon

Regards Dave
Reply With Quote
  #9  
Old 11-12-2011, 02:00 PM
OscarA's Avatar
Apprentice
 
Join Date: Nov 2010
Location: Melbourne, Australia
Posts: 226
Default Re: Tile adhesive?

Thanks Dave that's good to know. I will have a fair bit of adhesive left over so knowing I can use it as grout is good news.
I have some black cement coloring so I'll add some to the adhesive and see if it works being cement based I'm thinking it should. If It does then I make the grout black not sure if it'll look good orange terracotta tiles with black grout.
Red and black works but orange and black not sure I'll soon find out.
Reply With Quote
  #10  
Old 11-12-2011, 02:32 PM
david s's Avatar
Il Pizzaiolo
 
Join Date: Mar 2007
Location: Townsville, Nth Queensland,Australia
Posts: 4,705
Default Re: Tile adhesive?

Black and orange are terrific. Black will intensify whatever colour it is against because of the contrast. The effect will be reflective of the fire. Do it!
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Second broken Flue Tile christo Design Styles, Chimneys and Finish 19 09-09-2013 07:55 PM
The Great Tile Experiment. Lars Tools, Tips and Techniques 7 08-31-2010 07:41 AM
Tile to finish oven exterior ultratech2008 Design Styles, Chimneys and Finish 2 08-23-2010 02:54 PM
Oven fired up, now we've decided to tile stellawood Modular Refractory Oven Installation 8 12-19-2008 09:34 AM
7.25 inch tile saw ikhan42 Getting Started 7 07-17-2008 08:54 PM


All times are GMT -7. The time now is 07:23 PM.

Powered by vBulletin® Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
2006/10 Forno Bravo, LLC