#1  
Old 01-11-2014, 05:04 PM
NCMan's Avatar
Journeyman
 
Join Date: Jan 2014
Location: Western North Carolina, USA
Posts: 336
Default Hello from Western N.C.

Just wanted to say hi. I plan to start my WFO build this spring and can't wait to get going. Carl
Reply With Quote
  #2  
Old 01-11-2014, 05:53 PM
kbartman's Avatar
Master Builder
 
Join Date: Feb 2013
Location: Florida
Posts: 504
Default Re: Hello from Western N.C.

Welcome aboard NCMan, Can't wait too see what your planning. You have found the right place for ideas instruction and support. I began my build about a year ago, I could have not gotten this far without everyone's support.(I work very slowly) The forum has been a great tool. Once you said your hello's, I suggest starting a thread on what your planning, And I'm sure many will help you get started toward on your goal.

Good Luck
__________________
Respectfully,

KB
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.



To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

Last edited by kbartman; 01-11-2014 at 05:57 PM.
Reply With Quote
  #3  
Old 01-12-2014, 08:30 AM
NCMan's Avatar
Journeyman
 
Join Date: Jan 2014
Location: Western North Carolina, USA
Posts: 336
Default Re: Hello from Western N.C.

Thanx, kbartman. My build won't be near as elaborate as some on here, due to a lack of space, time and....money. I do have a masonry background, but none w/WFO's. Love this site and enjoyed looking over your build. I will be sure to take lots of photos and then work on setting up a thread, etc. Carl
Reply With Quote
  #4  
Old 01-12-2014, 12:23 PM
stonecutter's Avatar
Il Pizzaiolo
 
Join Date: Jun 2007
Location: South Carolina,USA
Posts: 1,840
Default Re: Hello from Western N.C.

What's your idea as to size, type, material for the oven? What about finishes?.. Enclosure, igloo, or ?.....
__________________

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.


Current WFO build -
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.


When we build, let us think that we build for ever.
John Ruskin
Reply With Quote
  #5  
Old 01-12-2014, 12:27 PM
stonecutter's Avatar
Il Pizzaiolo
 
Join Date: Jun 2007
Location: South Carolina,USA
Posts: 1,840
Default Re: Hello from Western N.C.

Also, if you have a masonry background, you might have enough laying around to do the job. Almost all the stone and brick I used came from other projects and I cobbled them together. Surely you have material laying around?
__________________

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.


Current WFO build -
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.


When we build, let us think that we build for ever.
John Ruskin
Reply With Quote
  #6  
Old 01-12-2014, 04:58 PM
NCMan's Avatar
Journeyman
 
Join Date: Jan 2014
Location: Western North Carolina, USA
Posts: 336
Default Re: Hello from Western N.C.

Hi John. I do a pretty good job of using up materials from jobs. I have a few cinder blocks, a bit of rebar, and probably enough of the stone to do what I need. I'm not sure what you call these stone, but it's like creek stone/river rock. For the most part, I need to buy what I need. As for design, etc, I'm open, but I do want to do maybe a 36" round. I loved your arch on your build w/the brick. Do you get up this way much or will it be after you move? Love to get some ideas, etc. A lot of people will be seeing this oven and I'd love it to be an eyecatcher, plus, hopefully, I can gain enough confidence and experience to build them for others. I have no doubt whatsoever that I will have people wanting them built. That'd be great. I love doing this type of work.
Reply With Quote
  #7  
Old 01-12-2014, 06:04 PM
stonecutter's Avatar
Il Pizzaiolo
 
Join Date: Jun 2007
Location: South Carolina,USA
Posts: 1,840
Default Re: Hello from Western N.C.

Quote:
Originally Posted by NCMan View Post
Hi John........
NCMan, John Ruskin was a genius..I just stole a quote of his. My name is Matt.




Quote:
Originally Posted by NCMan View Post
Do you get up this way much or will it be after you move? Love to get some ideas, etc. A lot of people will be seeing this oven and I'd love it to be an eyecatcher, plus, hopefully, I can gain enough confidence and experience to build them for others. I have no doubt whatsoever that I will have people wanting them built. That'd be great. I love doing this type of work.
I'm not sure when I will up there next. I have a bid in on a stone project, but even if that doesn't happen then we will be up a couple times before we relocate. But once you get underway, I can try to swing by if you want.

Put your thoughts on your thread, almost everyone here is helpful and encouraging, and are willing to share ideas and suggestions.

As far as offering WFO building as a service, as I said before, you should build a few before you do that. I had the privilege to help build and rebuild a bunch of historic beehive ovens ( most had a hemispherical dome, a couple more elliptical...I can't remember how many exactly.) and that was 5 or 6 years before I built my first freestanding oven. There was nowhere to get information...it was all learn on the job. This forum and the popularity of WFO cooking the last 5-8 years has flooded the internet with info, some great, some good, some bad. There is no replacement for experience, and a one-off isn't going to give that to you, because every clients desire, location and a million other variables, are different.

Just a suggestion and IMO.
__________________

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.


Current WFO build -
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.


When we build, let us think that we build for ever.
John Ruskin
Reply With Quote
  #8  
Old 01-13-2014, 03:34 PM
NCMan's Avatar
Journeyman
 
Join Date: Jan 2014
Location: Western North Carolina, USA
Posts: 336
Default Re: Hello from Western N.C.

Matt.....I understand and agree. Problem is, I have no other way to get that experience, but to build my own and possibly build another for a friend or two. W/my background, I should be fine. I have no other choice, really. When I see what a lot of the folks have done on here, in some cases w/no experience at all, I am amazed. Anytime I could get around guys like you or have access to others that have "been there, done that", it has to help. If you ever need some help once you get up here, maybe I can stop by and help sling some mud. Carl
Reply With Quote
  #9  
Old 01-13-2014, 04:58 PM
stonecutter's Avatar
Il Pizzaiolo
 
Join Date: Jun 2007
Location: South Carolina,USA
Posts: 1,840
Default Re: Hello from Western N.C.

Maybe I will take you up on that. I want to build at least a 42" oven.
__________________

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.


Current WFO build -
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.


When we build, let us think that we build for ever.
John Ruskin
Reply With Quote
  #10  
Old 01-13-2014, 06:10 PM
NCMan's Avatar
Journeyman
 
Join Date: Jan 2014
Location: Western North Carolina, USA
Posts: 336
Default Re: Hello from Western N.C.

Love to help. Just let me know.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Hello from Western NY DennisN Introductions 3 01-22-2013 03:52 AM
Western NY logman Northeast US 0 05-04-2012 09:45 AM
Hello, Checking in from western WA state Premio2G120 Introductions 2 08-09-2011 05:44 PM
Pizza Dough Supplier in Perth, Western Australia Neurojaz Australia 4 07-17-2011 07:57 AM
Greetings from Western Orygun Yamhillbilly Introductions 8 08-17-2010 01:20 PM


All times are GMT -7. The time now is 06:34 PM.

Powered by vBulletin® Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
2006/10 Forno Bravo, LLC