Go Back   Forno Bravo Forum: The Wood-Fired Oven Community > Regional Forums > Western US

Like Tree1Likes
  • 1 Post By SableSprings

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 05-22-2012, 11:57 AM
Serf
 
Join Date: May 2012
Location: Vancouver, wa
Posts: 12
Default Oven in the northwest

Hey guys, I'm new to the site and hoping to start a build on a Pompeii oven sometime in the near future. My question for you guys is, anyone out there build an oven out here in the land of the rain? Any tips, hits, or general suggestions? I'm not a very experienced builder but I know people who are and are willing to help. I guess I just want to know if I can get dry wood, and the best way to keep it dry. Also, anyone ever build some sort of canopy over their oven to keep out the rain? I would suppose you would some how need to allow your chimney through the canopy.

Well thanks guys!
Reply With Quote
  #2  
Old 05-22-2012, 06:37 PM
Apprentice
 
Join Date: Sep 2010
Location: Mesa, AZ
Posts: 235
Default Re: Oven in the northwest

There are several builders up in the PNW. Rain can cut into your construction, but during the early work you can cover it with an EZ-up or other cover.

Putting a chimney through the roof of a ramada or gazebo is just like any other hole--flash it and seal it. And make sure the chimney doesn't get too hot where it penetrates. One of the more experienced builders on here has photos of his project that goes through the roof of his house. I don't recall ehich builder, but you can probably find it with a search.
Reply With Quote
  #3  
Old 05-22-2012, 09:37 PM
SableSprings's Avatar
Apprentice
 
Join Date: May 2009
Location: Roseburg, OR USA
Posts: 216
Default Re: Oven in the northwest

Definitely plan for some covered wood storage away from the oven area for your main supply as well as enough wood storage near the oven for at least a couple of bakes/pizza parties. We have been able to enjoy using our oven all year round by putting it under an 18'x18' screened "room"...not only keeps off the winter & spring rain, but keeps away the summer & fall mosquitoes and yellow jackets. I highly recommend a screened enclosure if you can swing it...construction parties with your friends work pretty well when the promise of "real" pizza is offered.

We're south of you about 180 miles in Roseburg so our rainfall and yours are pretty similar. Rain shelters are relatively easy construction projects and since our temps are usually pretty mild, you don't have to make 'em heated and water tight to enjoy a lot of days during the year outside with your WFO. There are quite a few successful builds on Vancouver Island (B.C.) posted in the forum and they get quite a bit more rain than either of us will ever see.

One of your main concerns is going to be wind coming down the gorge...make sure you build the oven so that it faces away from the "normal" wind direction as much as possible.
__________________
Mike Stansbury
Roseburg, Oregon (
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
)

Photo albums

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
Reply With Quote
  #4  
Old 05-23-2012, 08:17 AM
Serf
 
Join Date: May 2012
Location: Vancouver, wa
Posts: 12
Default Re: Oven in the northwest

Thanks for the replies! Its good to know others have had success out here. Now I have two obstacles left in my way... Money... Which leads to the next one, my wife . Has anyone purchased their own materials instead of the kit? Did you save any money, or was it too much of a headache to find the right materials?

Ciao!
Reply With Quote
  #5  
Old 05-23-2012, 09:20 AM
SableSprings's Avatar
Apprentice
 
Join Date: May 2009
Location: Roseburg, OR USA
Posts: 216
Default Re: Oven in the northwest

Available kit/modular ovens are well worth the money and the available free "do it yourself" plans are really, really good. Many of the folks in this forum have built ovens by buying/scavenging bricks and all the other materials required either because kits were not available or they wanted to actually create these wonderful ovens from the ground up.

A wood fired oven is a serious investment in both time and money but as you will find reading through this forum, regrets are rare. My wife was not really into my idea of building the oven until we actually talked about making "The Dragonfly Den" a place that we could use frequently to have good eats & gatherings with friends. Now that we have had the working oven/den for over two years, neither of us can come up with anything we would have done differently except building it bigger!

You will love it...but it's kinda like having kids...a constant effort, a lot of time and money, trying at times, but long term--well worth it.
Mmeewes likes this.
__________________
Mike Stansbury
Roseburg, Oregon (
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
)

Photo albums

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
Reply With Quote
  #6  
Old 05-23-2012, 11:27 AM
Serf
 
Join Date: May 2012
Location: Vancouver, wa
Posts: 12
Default Re: Oven in the northwest

Well said! Well thanks for all your input, when i am able to start I will be sure to post about it.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Why Italian Wood-Fired Ovens are Round james Newbie Forum 50 04-01-2014 09:14 PM
Travel Report: The Greek Wood Oven FornoBravoNews Europe 2 04-28-2012 02:54 PM
Greek Wood Ovens james Brick Oven Photos 3 09-27-2011 07:34 AM
Wanting to build a wood fire oven the best way we can Wheels1974 Getting Started 9 05-19-2010 07:53 AM
Neapolitana Style Oven (31.5") southpaw Pompeii Oven Construction 4 08-11-2007 06:29 AM


All times are GMT -7. The time now is 04:17 AM.

Powered by vBulletin® Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
2006/10 Forno Bravo, LLC