#1  
Old 03-26-2013, 07:46 AM
K79's Avatar
K79 K79 is offline
Journeyman
 
Join Date: Nov 2012
Location: Maine
Posts: 389
Default DuraVent Prices

Can anyone tell me the cheapest place online for DuraVent products.

So far I've looked at ventingpipe.com and woodstovepro. Ventingpipe is the cheapest so far.

Thanks.
Reply With Quote
  #2  
Old 03-26-2013, 08:24 AM
deejayoh's Avatar
Il Pizzaiolo
 
Join Date: Jul 2010
Location: Seattle
Posts: 1,380
Default Re: DuraVent Prices

5% off + free shipping at Build.com - code "duravent5"

DuraVent Vent Pipe
__________________

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

Last edited by deejayoh; 03-26-2013 at 08:28 AM.
Reply With Quote
  #3  
Old 03-26-2013, 08:45 AM
UtahBeehiver's Avatar
Il Pizzaiolo
 
Join Date: May 2012
Location: Salt Lake City, Utah
Posts: 1,946
Default Re: DuraVent Prices

If you are patient, I found a new 24" of Selkirt double wall SS piece on Ebay for $45 and another at a Habilitat for Humanity store called restore for $5. Craiglist is also a good source.
__________________
Russell

Experiences are the names I call my mistakes!

Link to my build -
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.


My Picassa Picture Log
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
Reply With Quote
  #4  
Old 03-26-2013, 12:34 PM
K79's Avatar
K79 K79 is offline
Journeyman
 
Join Date: Nov 2012
Location: Maine
Posts: 389
Default Re: DuraVent Prices

I'm open to Supervent as well.
Reply With Quote
  #5  
Old 03-26-2013, 04:24 PM
Laborer
 
Join Date: Sep 2009
Location: Harrisonburg, Virginia
Posts: 62
Default Re: DuraVent Prices

I had mine made at a metal fab shop after david s from Australia recommended it to me. Four foot long, eight inch ID, stainless steel double wall with an anchor plate and rain cap. It does not have to be four feet. I have a steep roof and needed a little extra length.

Then I stuffed insulation between the walls. It was much less expensive and works just as well. Call around and save yourself some money.

Good luck,

David
__________________
"Leave the gun. Take the cannoli." - Peter Clemenza
Reply With Quote
  #6  
Old 03-26-2013, 04:30 PM
Laborer
 
Join Date: Sep 2009
Location: Harrisonburg, Virginia
Posts: 62
Default Re: DuraVent Prices

I tried the craigslist route but I could only find six inch ID. The one eight inch I did find the guy wanted almost new prices for the pipe and he did not have anything else I needed.

My habitat store did not have any chimney pipe at all. The man there said they never have it in stock.

Good luck,

David
__________________
"Leave the gun. Take the cannoli." - Peter Clemenza
Reply With Quote
  #7  
Old 04-18-2013, 05:57 AM
Serf
 
Join Date: Aug 2009
Location: Tampa Bay, FL
Posts: 13
Default Re: DuraVent Prices

Hello, I have a ton of 6" DVL (double wall) in selkirk, duratech and international chimney. I have some that are 6" ID and both 8" and 10" od. Email or PM for info.

Rick
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Duravent Anchor Plate - Gasket required? deejayoh Design Styles, Chimneys and Finish 3 06-11-2012 11:30 PM
Is an 8 inch Duravent ok for 42 oven ThermoJax Design Styles, Chimneys and Finish 7 10-14-2010 12:15 PM
DuraVent Transition blacknoir Getting Started 0 07-08-2009 03:52 PM
Fire Brick Prices in Australia jfy Newbie Forum 4 02-15-2008 01:33 PM
Duravent chimney question gjbingham Design Styles, Chimneys and Finish 6 01-02-2008 07:09 PM


All times are GMT -7. The time now is 07:03 AM.

Powered by vBulletin® Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
2006/10 Forno Bravo, LLC