Go Back   Forno Bravo Forum: The Wood-Fired Oven Community > Pizza Oven Design and Installation > Other Oven Types

Like Tree1Likes

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 01-19-2012, 06:37 PM
Peasant
 
Join Date: Aug 2009
Location: los angeles
Posts: 28
Default Building an oven with ultimate control

Hey all,
I am a long time reader, and avid pizza maker. I started out with a simple self cleaning oven hack, moved to an LBE, and now a full blown wood fired oven. I love making pizza, but I am also a technology control geek at heart. As an engineer, I always am excited for pursuing perfection through computer based control. (I put a PID controller on everything that will take one, my espresso machine, smoker, sous vide, the works).
I know that pizza is an art, and many will take offense to the fact I am trying to build a highly controlled oven, but for those people, i simply ask, please look away.
So, here is what I am trying to do.

I have been working on a design of a wood burning oven with a supplement of either gas or electric with a highly controllable temperature system. The idea is to have the floor of the oven PID controlled so I can set it to 800 (or any other temperature). In addition, I am looking to control the oven air temperature with variable control. For example, I would like to start the pizza "cycle" with a 800 floor/ 1400 air temp. This will last about 10-15 seconds, then i will go 800/1200 degrees for the last 75 seconds (these numbers are just pulled out of the air, if anyone has specific numbers, please share).

In order to make the fire run at such high heat, we have been looking at running a forced air system connected to a centrifugal blower, run by an arduino controller. This forced air system should be able to make the wood fire burn within a much higher range of temperatures. I know that traditionalists are against this, but we are looking at implementing a gas powered or electric coil system (similar to a ceramic kiln) underneath the floor of the cooking base. This cooking floor heating element will be independently controlled by another arduino/pid.

We are looking to make all heating elements reside OUTSIDE of the main cooking chamber. The chamber should be pure heat. We have thought about keeping all the heating elements below the oven. The wood/air burners will be offset from center, and the gas or electric heaters in the center.

I have a friend of mine currently working up a 3d model of our rough plan design, so I will post this shortly.

That being said, I am looking at several designs, and have the resources to make this happen....but, before I begin, I wanted the insight of the pizzamaking.com community.

All insight is very much appreciated.
TheSweetSnazzoo likes this.
Reply With Quote
  #2  
Old 01-20-2012, 05:12 PM
david s's Avatar
Il Pizzaiolo
 
Join Date: Mar 2007
Location: Townsville, Nth Queensland,Australia
Posts: 4,724
Default Re: Building an oven with ultimate control

Good luck. Generally for most WFO nuts the attraction is the low tech nature of firing and cooking in them. Most owners find that high tech stuff rather redundant once they get to know their ovens. The three second semolina test for floor temp for example is not only simple and reliable, but is a connection to the way things have been done for centuries. Likewise a fist held in the centre of the oven for as long as is comfortable is another reliable method.
Reply With Quote
  #3  
Old 01-20-2012, 09:41 PM
OzOvenBuilder's Avatar
Laborer
 
Join Date: Oct 2011
Location: Western District, Victoria, Australia
Posts: 79
Default Re: Building an oven with ultimate control

Quote:
Originally Posted by avidan View Post
The idea is to have the floor of the oven PID controlled so I can set it to 800 (or any other temperature

Hi avidan,

I can't wait to see what you come up with. We use 100s of PIDs at my day job in a large computer controlled plant, so I have a slight idea of what you can do with these little devices!

Cheers,
Russell.
__________________
Boom Shanker! (Neil - The Young Ones)


To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
Reply With Quote
  #4  
Old 01-21-2012, 12:21 AM
Peasant
 
Join Date: Aug 2009
Location: los angeles
Posts: 28
Default Re: Building an oven with ultimate control

hey oz.
I'm quite excited about it as well.
i have used a fair number of PID controllers, while building and maintaining glass furnaces for my glassblowing studio....part of the inspiration for this project comes from all the lessons learned in the glass studio.
its pretty amazing to see what can be done with a small PID controller and some controlled environments.

david,
its funny that you mention the connection to history, as much of the glassblowing world is quite similar. its a connection to the way its been done for hundreds of years (if not thousands). however, even though much of the process of glassblowing hasn't changed, integration of technology has made the process more accessible (ironically). in a sense, it doesn't take years of training and apprenticeship to become a master. for example, in the glassblowing world, we no longer need to understand how to mix our own colored glass. the technology available allows factories to generate an amazing pallet of colors for us. as glassblowers, we can then focus on the task of making the artwork. that being said, i feel like we have an opportunity to control the machine, and allow the artisan to focus on making pizza
that being said, the art of making pizza will still continue, even with a controlled baking environment....
Reply With Quote
  #5  
Old 01-21-2012, 06:28 AM
Il Pizzaiolo
 
Join Date: Nov 2006
Location: San Antonio
Posts: 1,719
Default Re: Building an oven with ultimate control

With all due respect I think you are tilting at windmills. I would suggest you get some hands on experience with a conventional WFO before you potentially waste a tremendous amount of effort and likely money pursuing a control level that is beyond IMO meaningless. Note: we all have different things we focus on and you are welcome to this, but the most "perfect" oven in the world will need to vary with dough thickness and hydration, topping levels, etc. You seem to vastly overestimate the significance of precise temps. (And I am an engineer also.)

Your example of an 800 degree hearth and a 1400 or 1200 degree dome is an example of what I think is misguided. Heat from the hearth is clearly from contact (and don't underestimate the significance of heat conductivity and heat capacity of the hearth and subrefractory in maintaining the temperature PROFILE you want during the bake). The heat to the top is predominantly radiational and the dome and the flames are a significant factor in cooking/caramelizing the top and toppings.

Put simply methinks you are trying to microcontrol variables that are 1) not very critical and 2) ignoring other factors. The learning curve for what you propose would be very long and IMO not very illuminating because variation in other parameters would put too much noise in your outcomes. There is no truly "standard" pie.

OTOH, it can be a quest! Good luck!
Jay
Reply With Quote
  #6  
Old 01-21-2012, 01:20 PM
stoveup's Avatar
Laborer
 
Join Date: Sep 2010
Location: Winston-Salem, North Carolina, USA
Posts: 86
Default Re: Building an oven with ultimate control

What, pray tell, is a PID? Non-engineer but nonetheless inquiring minds want to know what this is all about!
Reply With Quote
  #7  
Old 01-21-2012, 01:55 PM
Faith In Virginia's Avatar
Master Builder
 
Join Date: Oct 2010
Location: Virginia
Posts: 720
Default Re: Building an oven with ultimate control

PID= proportional–integral–derivative controller. Think of it as a fancy thermostat.
Reply With Quote
  #8  
Old 01-21-2012, 02:34 PM
stoveup's Avatar
Laborer
 
Join Date: Sep 2010
Location: Winston-Salem, North Carolina, USA
Posts: 86
Default Re: Building an oven with ultimate control

Yeah - I looked it up on the Wickedpedia and man do I feel stupid! Wish I hadn't asked. WAY too much information!

You engineer types need to go off to a corner by yourselves and leave the rest of us to our blissful ignorance. OK -not really. I thoroughly enjoy reading the posts from the obsessively tech savvy among us. There is such a wealth of knowledge out there and I constantly learn a lot of neat stuff from you guys and girls. I don't understand the desire to turn building a WFO into something approaching rocket science or cooking pizza into an industrial process, but as Jay so wisely said, that's your quest. So indulge yourself and keep the posts coming!

As for me, I'd much rather spend my time developing great pizza dough technique. And eating pizza!

Last edited by stoveup; 01-21-2012 at 02:35 PM. Reason: spelling error
Reply With Quote
  #9  
Old 01-21-2012, 06:30 PM
GianniFocaccia's Avatar
Il Pizzaiolo
 
Join Date: Jun 2009
Location: Disneyland, CA
Posts: 1,406
Default Re: Building an oven with ultimate control

This is a fascinating concept, one that I'm sure commercial oven-designers have considered: how to get a ceramic/brick vessel to efficiently respond to periods of slow/peak demand and still deliver the nuances that only wood can impart. Aside from the fact that discussing running gas in a home WFO is strictly forbidden on this site, I side with Jay's beliefs that this is not the best application for a micro-controlled environment. Bricks safely absorb heat only so fast, limiting the value of a dual-zone heating scheme. Also, the coasting curve of an oven is not easily manipulated, apart from dome-thickness and insulation. As sexy a concept as a hybrid oven is, even if you could build a system that is responsive, easy to build and cost-effective, the benefits, IMO would be incremental at best.
Reply With Quote
  #10  
Old 01-22-2012, 12:26 AM
Laborer
 
Join Date: Sep 2009
Location: brisbane
Posts: 89
Default Re: Building an oven with ultimate control

I play with arduino and spend hours tweaking PID's for fun also, but in rc tricopter aircraft. I look forward to seeing what you come up with and would be keen to look over what code you come up with for this... However I for see many sensors required and kinda killing the old school art that a WFO has,.
I will be watching with interest but will keep the arduino's for flying and wood for pizza.
Good luck and keep us posted.
Rob
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Oven Curing james Firing Your Oven 335 07-15-2014 07:12 PM
Why Italian Wood-Fired Ovens are Round james Newbie Forum 50 04-01-2014 09:14 PM
Barrel vault oven building questions ravenja Getting Started 0 09-12-2011 11:26 PM
Tuscan and Naples designs james Pompeii Oven Construction 5 09-11-2011 04:53 PM
Curing Casa2G90 kirakat Firing Your Oven 6 07-24-2011 07:50 AM


All times are GMT -7. The time now is 10:39 PM.

Powered by vBulletin® Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
2006/10 Forno Bravo, LLC