#1  
Old 04-23-2008, 11:33 AM
Il Pizzaiolo
 
Join Date: Dec 2006
Location: Mishigame & Iberia
Posts: 1,168
Default That's all folks....do you ever get finished?

A quick update on my summer kitchen...Well I added a door to the wood storage area, put a tap in the sink and a swinging door on the bathroom in the kitchen

I'm done for this year but already planning a spanish tile roof for the bathroom that will extend over the open hearth for my next project....and I'll need to pick a small chimney completion.

XJ
Attached Thumbnails
That's all folks....do you ever get finished?-imgp0907.jpg   That's all folks....do you ever get finished?-imgp0904.jpg   That's all folks....do you ever get finished?-imgp0909.jpg  
__________________

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
Tiempo para guzarlos.....
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
...enjoy every sandwich!
Reply With Quote
  #2  
Old 04-23-2008, 11:53 AM
james's Avatar
Brick Oven Merchant
 
Join Date: Mar 2005
Location: Pebble Beach, CA
Posts: 4,648
Default Re: That's all folks....do you ever get finished?

Very, very nice Jim. I like the hatchet.

Does your oven stick out on the other side of the wall, or did you fit it all inside. I think that is one of the interesting design trade-offs for outdoor corner installations. The oven tends to be deeper than the counters -- so, do you push the oven forward (as I did), or slide it back to line up with the counters (but you need space back there it slide it).

James
__________________

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
Reply With Quote
  #3  
Old 04-23-2008, 12:21 PM
Il Pizzaiolo
 
Join Date: Dec 2006
Location: Mishigame & Iberia
Posts: 1,168
Default Re: That's all folks....do you ever get finished?

James, the oven fit inside the walls.

The granite was custom made to fit the space available using a cardboard template.

But you're right, if I was doing a new construction, it would work very well to "push" the oven back into the wall. Space was not too much of an issue.

XJ

(George, you made a comment about not liking your corner installation....I don't remember your reasoning...did you respond?)
__________________

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
Tiempo para guzarlos.....
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
...enjoy every sandwich!
Reply With Quote
  #4  
Old 04-23-2008, 09:57 PM
Journeyman
 
Join Date: Oct 2007
Location: Fethiye Turkey
Posts: 265
Default Re: That's all folks....do you ever get finished?

Beautiful kitchen XJim...............

May you enjoy many fiestas!

Reply With Quote
  #5  
Old 04-23-2008, 10:35 PM
gjbingham's Avatar
Il Pizzaiolo
 
Join Date: Sep 2007
Location: Longview, WA
Posts: 2,021
Default Re: That's all folks....do you ever get finished?

Corner installation.... did I complain? OK, I guess I did. The plans for the Pompeii don't cover a corner installation, except for the case of a pre-fab oven, which requires less space. You're kind of stuck making it up as you go.

As I was firing the oven today, I looked with distain at the opening under the oven where firewood is stored. A better use of space would be to use a side storage areas vs. an opening just in the front - probably 30 inches wide and spreading to 64 inches (side to side on the base) and 90ish inches corner to corner on each side of the oven. A great waste of space unless you like getting on your hands an knees to retrieve firewood from the corners. I know, bitch and moan. Waaa waaa waaa Hey! I've got a WFO! A good lesson for other builders though.

I'd love to have a bit more space on the slab I poured inside the existing footing. I could have poured another footing and slid the oven backward as James suggests, but when I poured that concrete slab, I didn't really believe that I was going to really build the oven. It was just one of those..."well, if I'm going to build an oven someday, I'll need a slab to build it on" moments. A month later, I was off and running. Piss poor planning as we used to say in the Navy. I still resemble that remark today.

Nice outdoor kitchen XJ. Why the door on the bathroom? Shy?
__________________
GJBingham
-----------------------------------
Everyone makes mistakes. The trick is to make mistakes when nobody is looking.

-
Reply With Quote
  #6  
Old 04-24-2008, 05:31 AM
christo's Avatar
Master Builder
 
Join Date: Feb 2006
Location: Eastern NC
Posts: 910
Default Re: That's all folks....do you ever get finished?

For my corner install - I went with a 5 sided stand. 90 degrees at the back. wood opening at the front and another at the back side.

Early pic of the front:


Early pic of the side door:


This arrangmement is working pretty well for me as I have access to the back - Jim would have to go through a hole in his wall...

I also think the 5 sides keeps the oven base smaller and fools the eye to make it look even smaller....
__________________
My oven progress -

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
Reply With Quote
  #7  
Old 04-24-2008, 10:07 AM
brokencookie's Avatar
Journeyman
 
Join Date: Oct 2007
Location: Pacific Northwest
Posts: 376
Default Re: That's all folks....do you ever get finished?

Are the central wall of blocks for additional support or just to divide up your storage area ?

Bruce
__________________
Sharpei Diem.....Seize the wrinkle dog
Reply With Quote
  #8  
Old 04-24-2008, 10:37 AM
SpringJim's Avatar
Master Builder
 
Join Date: Apr 2008
Location: Spring Lake, MI
Posts: 561
Default Re: That's all folks....do you ever get finished?

Those are both nice ideas Christo.
Reply With Quote
  #9  
Old 04-24-2008, 11:02 AM
gjbingham's Avatar
Il Pizzaiolo
 
Join Date: Sep 2007
Location: Longview, WA
Posts: 2,021
Default Re: That's all folks....do you ever get finished?

I agree. A very nice way to go. I was way past these pics in my build when Christo showed me how he did his.
__________________
GJBingham
-----------------------------------
Everyone makes mistakes. The trick is to make mistakes when nobody is looking.

-
Reply With Quote
  #10  
Old 04-24-2008, 01:57 PM
christo's Avatar
Master Builder
 
Join Date: Feb 2006
Location: Eastern NC
Posts: 910
Default Re: That's all folks....do you ever get finished?

The center wall wasn't required for support but since it was there we used it as support for the hardibacker we used instead of plywood to support the hearth concrete as it cured. Used a single 2x4 under a short piece of 1x6 to support the small area of hardibacker while the hearth cured.


Coated the inner wall and outer walls with fiber reinforced block/stucco type coating afterwards.
__________________
My oven progress -

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
I finished my bake oven! intheberkshires Newbie Forum 10 11-30-2008 06:44 AM
Outdoor kitchen finished! Xabia Jim Outdoor Kitchen Design 23 05-30-2008 04:23 AM
Finally finished Oven :) Frenchcanuck Pompeii Oven Construction 5 08-21-2007 09:15 AM
Perlcrete over foil dome insulation finished Marcel Brick Oven Photos 1 06-27-2006 08:14 PM
Finished Oven vitoduke Brick Oven Photos 4 10-18-2005 02:26 PM


All times are GMT -7. The time now is 03:02 PM.

Powered by vBulletin® Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
© 2006/10 Forno Bravo, LLC