#1  
Old 10-16-2010, 09:29 AM
Apprentice
 
Join Date: Oct 2010
Location: Pensacola, Florida
Posts: 112
Default Florida Newcomer

Greetings from Pensacola. I was lucky enough to find this site after looking for alternatives to pizza stone cooking. At the time I had no idea what was available. As with everyone here, I've now become obsessed with building an oven. I've decided on a 42 inch tuscan design and have already found tons of information thanks to all of you. I look forward to the all encompassing ride.
Reply With Quote
  #2  
Old 10-18-2010, 11:10 AM
dbhansen's Avatar
Master Builder
 
Join Date: Jun 2007
Location: Appleton, WI
Posts: 563
Default Re: Florida Newcomer

Welcome! Must be nice to live somewhere where you can build year-round (at least when there's no rain). When do you start?
__________________

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
Reply With Quote
  #3  
Old 10-18-2010, 03:32 PM
Apprentice
 
Join Date: Oct 2010
Location: Pensacola, Florida
Posts: 112
Default Re: Florida Newcomer

Thank you for the welcome. I hope to start by the end of November. To start I have to move one of those huge Sam's club swing/play sets that took 3 days to set up. I'll also have to build in sections as I want to have an outdoor kitchen when it's all finished. Hate to be a copycat, but I'm working on reverse engineering the Anaheim Oven build from this site. I figure about a year for the total build, but the oven gets done first. I've read many of your threads, and appreciate your reply.

Leigh
Reply With Quote
  #4  
Old 10-22-2010, 09:00 AM
efleifel's Avatar
Laborer
 
Join Date: Jul 2008
Location: Florida
Posts: 88
Default Re: Florida Newcomer

Welcome aboard, you will find that this forum is very helpful, I built my first oven in Jacksonville, Fl, and now I am building my next one here in Orlando.
All of my ideas and progress was taken from this forum.
Take a lot of pictures.
Salute
Reply With Quote
  #5  
Old 10-22-2010, 10:48 PM
Apprentice
 
Join Date: Oct 2010
Location: Pensacola, Florida
Posts: 112
Default Re: Florida Newcomer

Thanks ef. I am looking forward to getting started and as you say, this forum has been amazing. The planning for my WFO area is almost complete and I'll post some pictures of the build area as well as a Google Sketchup of the dream. I look forward to the interaction of the forum.
Reply With Quote
  #6  
Old 10-25-2010, 09:17 AM
SteveP's Avatar
Apprentice
 
Join Date: Oct 2008
Location: Port Saint Lucie, FL
Posts: 114
Default Re: Florida Newcomer

Good to see another FL builder. Good luck, and I look forward to seeing your progress.
__________________
My WFO project:
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
Reply With Quote
  #7  
Old 10-29-2010, 09:21 PM
Apprentice
 
Join Date: Oct 2010
Location: Pensacola, Florida
Posts: 112
Default Re: Florida Newcomer

Thanks Steve. I just found out the negative side of living in hurricane country. As I related earlier, I'm going to try to copy the Anaheim Oven. I stopped by the building permit place just to make sure I was cool with the build. They told me not only would I need engineering for the foundations, I would need wind load calculations from an engineer for the pergola structure. Then architectural drawings of the home site plan as well as build drawings. All told about $850 just to get permits. My next major hurdle is to try to show my lovely wife how much nicer an outdoor kitchen would be with architect and engineer involvement.
Reply With Quote
  #8  
Old 10-30-2010, 05:51 PM
efleifel's Avatar
Laborer
 
Join Date: Jul 2008
Location: Florida
Posts: 88
Default Re: Florida Newcomer

I live in Florida as well, but I was told that I do not need a permit if the structure is less than 180 sq.ft., besides, I do not think they knew what I was talking about because I do not have a drawing, it is all in my head and that is what I said, so maybe it is different from county to county, but of course I do not know what an Anaheim oven is , althought I googled it, but got nothing.
Good luck

Eddie
hhtp://www.edware.net/
Reply With Quote
  #9  
Old 10-30-2010, 08:16 PM
Il Pizzaiolo
 
Join Date: Jan 2007
Location: Tampa, FL
Posts: 1,446
Default Re: Florida Newcomer

I think several factors come into play with rodeair's build and his local building dept.

1) The overall scope, design and size of the project, if he is trying to duplicate the Anaheim Oven, it is rather large. The pergola looks like it covers at least a 20' x 20' area. I am most certainly NOT a fan of my local building dept, but I would want them involved if my next door neighbor decided to bang out an open sided, wooden, semi-roofed, structure. If done wrong, we are talking disaster during any tropical system.

2) Pensacola is direct coastal......wind codes are much more stringent within 10 miles of the coast. Local codes can also be more strict than the state guidelines.

3) Fire codes - a wodden structure within close proximity to a fire source



Although this project is going to cost you; getting the proper engineering, permits, and plans is the right thing to do for this project.
Personally, I am in the same boat as Eddie. My oven fell into the free standing BBQ category. Since it covers less than 100 sq. ft, has no roof (igloo), and has no power or plumbing run into it, the building dept gave me a pass. Although they did mention any poured concrete slab needed a permit and inspected (I didn't bother). National Fire Code was mentioned by my local fire chief and followed.

RT
Reply With Quote
  #10  
Old 10-31-2010, 09:36 AM
Apprentice
 
Join Date: Oct 2010
Location: Pensacola, Florida
Posts: 112
Default Re: Florida Newcomer

Thanks for the response guys. As you said RT, the codes here in Pensacola are pretty stringent. I think the wind loading on the structure has to withstand 160 mph winds. Hurricane Ivan in 2004 decimated this area although i was one of the fortunate ones. I considered the same points you guys mention and will feel much safer and better when I am sure the footings for the pergola and the overall design is sound. Eddie, the Anaheim oven pictures are part of James's collections. If you go to the gallery of "finished ovens", it's on the last page. There were several in-process pictures which I was able to convert to drawings and dimensions. I'm hoping to have the permits by the end of November and get a start on it. I'll be taking it a bit slow because it will be costly and it'll be all DIY. Thanks again for the interest.

Leigh
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
North Florida Primavera installation Stan Modular Refractory Oven Installation 3 04-17-2010 03:22 PM
New WFO build in Northeast Florida g8rjoe Introductions 4 04-03-2009 04:42 PM
Help! Moist Wood In South Florida! tom di Brick Oven Photos 2 01-24-2009 11:59 AM
Hi from Palm Beach county Florida larrya1049 Introductions 10 07-19-2008 06:57 PM
Hello from Florida! rjdirienzo Introductions 1 01-11-2008 08:45 AM


All times are GMT -7. The time now is 04:10 PM.

Powered by vBulletin® Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
© 2006/10 Forno Bravo, LLC