Go Back   Forno Bravo Forum: The Wood-Fired Oven Community > Good Background Information > Brick Oven Photos

Like Tree1Likes

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 05-06-2014, 08:40 PM
Serf
 
Join Date: May 2014
Location: Western Australia
Posts: 15
Default 100cm Oven Perth, Western Australia

Hello all,

Purchased my first house 6 months ago, and get the keys this Friday after it has been rented out.

Been lurking on here for a couple of months doing my research ready for the build.

Have Friday off work to get started so can get stuck in for a full 3 days. Getting my bricks delivered, sand, and already have a work ute filled with high heat mortar, ceramic board (2"), Tbar (for the opening), 650C insulation.

Plan is a mass brick plinth (1430mm x 1430mm filled solid with bricks) with a small recess for firewood. ceramic board over the plinth at 772mm high, firebrick hearth over the ceramic board (undecided on 76mm high, or 110mm brick on edge?). Will then construct the dome, with 2 layers of 50mm 650C rated insulation over the dome, then skim coat of render followed by acratex/acrylic coating. The insulation has a steel mesh backing which should help the render stage.

I was a bricklayer by trade for 5 years, but also did a diploma in building/construction during my apprenticeship, and now work in the office for a luxury builder, which has helped me obtain all materials and gotten me good pricing as I work in pricing/materials/estimating.

Only thing now is to get my eye back in on the trowel.

Pictures to follow this weekend as I should get the plinth and hearth all done, and the dome the following weekend then a week of curing fires prior to the insulation/render stage on the 3rd weekend. This is of course all going to plan, which building seldom does.
Reply With Quote
  #2  
Old 05-10-2014, 12:17 AM
Laborer
 
Join Date: May 2014
Location: in the oven
Posts: 55
Default Re: 100cm Oven Perth, Western Australia

Looks like we are at pretty much the same stage mate. I just poured the insulating layer last night and will let it cure for 4 days before beginning with the bricks. Your schedule sounds promising as I have "promised" pizzas within 4 weeks.
Let's race! =)
__________________
Let's keep it metric
Reply With Quote
  #3  
Old 05-10-2014, 01:46 AM
cobblerdave's Avatar
Il Pizzaiolo
 
Join Date: Jan 2010
Location: brisbane australia
Posts: 2,469
Smile Re: 100cm Oven Perth, Western Australia

G'day
A bricklayer by trade, dry insulation, as long as you don't get bogged down with fancy brickwork cuts.....I recon you'll make your deadline.
As for the bricks at the 75 or the 110, id consider the 75 for balance between heat heat up times and heat retention. Most ovens have 50 mm and operate well enough for days. They will still produce multiple loaves dependant on size of course but not multiple batches. So unless you doing multiple bread batches regularly....?
Regards Dave
__________________
Measure twice
Cut once
Fit in position with largest hammer

My Build

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

My Door

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
Reply With Quote
  #4  
Old 05-10-2014, 06:22 AM
Journeyman
 
Join Date: Mar 2011
Location: Bucks County, PA
Posts: 287
Default Re: 100cm Oven Perth, Western Australia

I like the fact that your first project in your new home is to build an oven. I have been wanting to sell my house just so I have an excuse to build a new oven.
Reply With Quote
  #5  
Old 05-10-2014, 02:29 PM
Laborer
 
Join Date: May 2014
Location: in the oven
Posts: 55
Default Re: 100cm Oven Perth, Western Australia

Quote:
Originally Posted by cobblerdave View Post
Most ovens have 50 mm and operate well enough for days.
Regards Dave
Could you please expand on that?
__________________
Let's keep it metric
Reply With Quote
  #6  
Old 05-10-2014, 08:03 PM
cobblerdave's Avatar
Il Pizzaiolo
 
Join Date: Jan 2010
Location: brisbane australia
Posts: 2,469
Default Re: 100cm Oven Perth, Western Australia

G'day
The Pompeii are your all rounder oven. It will get to Neo pizza temps and stay there for continuous pizzas. You can bake bread, roast meats, slow casseroles over a weekend. Cook with fire in the oven or on the heat stored in the brick.
All ovens are a little different.i know mine best. Its a 1 mtre full dome, 75 mm firebrick hearth, 1/2 brick thick dome.
2 hours burn on the Friday will see you at pizza temps, keep a fire on the side licking up the walls. This will replenish the heat lost as you cook pizza continuously.
Cap the oven off with an insulated door and you'll be able to bake next morning. A bread load for me is a focaccia a couple of bread sticks and bread. Ill have enough heat to slow roast dome meat and veg that afternoon. I'd probably start a small fire on the side to brown thing off.
All going well you'll have enough heat to put a casserole next day.
If you run out of stored heat just flashing up a fire for 1/2 hr or so and then waiting for things to equalize will usually see things right.
Raising the oven mass will result in longer firing times to get enough heat in the mass. Yes you can still cook pizza and have longer baking ability to make masses of bread but if you don't have the use for the heats, its lost to later in the week. Myself I'm like most folk the flexibility more important.
This afternoons the Tuscan grill. Take my oven from cold with a 1 hrs burn of iron bark. Spread the coals out and put on grill over them. The food cooks from the coals and the reflected heat from the dome. Cooks fast and tender better than any BBQ. Have a 40 cm pair of tongs and a pair of welding gloves this time, I lost a few arm hairs last time!
Regards dave
__________________
Measure twice
Cut once
Fit in position with largest hammer

My Build

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

My Door

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

Last edited by cobblerdave; 05-10-2014 at 08:40 PM. Reason: Speeling
Reply With Quote
  #7  
Old 05-11-2014, 04:48 AM
Serf
 
Join Date: May 2014
Location: Western Australia
Posts: 15
Default Re: 100cm Oven Perth, Western Australia

So i didnt get to lay any bricks on the Friday off, had too many of my trades coming through, materials deliveries and all sorts for what I am doing inside the house.

However, spent Saturday and Sunday laying bricks, and this is where I am at now. Have gone with 75mm on top of the ceramic fibre board (though it was 100mm short, but the dome wont be on the outer edge so you can see the 1 course of bricks around the edge below the herringbone).

All going well, I should get the dome up next weekend.







Reply With Quote
  #8  
Old 05-11-2014, 04:51 AM
Serf
 
Join Date: May 2014
Location: Western Australia
Posts: 15
Default Re: 100cm Oven Perth, Western Australia

Reply With Quote
  #9  
Old 05-18-2014, 04:41 AM
Serf
 
Join Date: May 2014
Location: Western Australia
Posts: 15
Default Re: 100cm Oven Perth, Western Australia

So after a couple of long days I got there, 4 days total. This afternoon I did a quick fire of newspaper for a couple of minutes. The chimney gets nice draw on it, plus I have a fan on an angle ready in case the prevailing winds ever decide to blow closer to the house. Don't want to smoke myself out. So a few curing fires over this week, then a small skim of refractory mortar, insulation, skim coat and then acrylic finish on the dome.

Now for years of practice making food in it.







Reply With Quote
  #10  
Old 05-18-2014, 05:07 AM
cobblerdave's Avatar
Il Pizzaiolo
 
Join Date: Jan 2010
Location: brisbane australia
Posts: 2,469
Exclamation Re: 100cm Oven Perth, Western Australia

G'day
If you worried about smoking out the house get a s /s chimney on that thing to carry it above the house . Once cured and if you use well dried wood that's not a problem.
Give that bare dome a time for the cement to cure and dry before you you lite any big fires. WA has plenty of wind at any time of the year so that's good but if you expect rain, cover ,it over.
What are you using for dome insulation? It's better to dry the dome then insulate before trying any big fires .
Water turns to steam at 100C and 1 ltre of water expands to 1500 ltre of steam.
Take it slow with the fires
Regards dave
__________________
Measure twice
Cut once
Fit in position with largest hammer

My Build

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

My Door

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Why Italian Wood-Fired Ovens are Round james Newbie Forum 50 04-01-2014 10:14 PM
Claypave Pizza Oven Kit - Australia Jye Getting Started 9 03-01-2013 02:03 AM
Travel Report: The Greek Wood Oven FornoBravoNews Europe 2 04-28-2012 03:54 PM
Neapolitana Style Oven (31.5") southpaw Pompeii Oven Construction 4 08-11-2007 07:29 AM
Why we did the Pompeii Oven james Introductions 0 03-21-2005 04:48 AM


All times are GMT -7. The time now is 09:47 PM.

Powered by vBulletin® Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
2006/10 Forno Bravo, LLC