#1  
Old 05-28-2009, 10:07 AM
Serf
 
Join Date: Apr 2009
Location: North Yorkshire UK
Posts: 17
Default Small cracks in mortar.

Hi
I am firing my oven and going through the curing process. I have started to notice small cracks appearing in the mortar on the front arch of the oven. Should I worry about this (figure that the oven may have got too hot too quick). I have filled the cracks with more mortar but am a bit concerned. The mortar seems to have cracked on the inside of the oven also.
Any help would be great.
Thanks
Reply With Quote
  #2  
Old 05-28-2009, 12:06 PM
dmun's Avatar
Moderator
 
Join Date: Jul 2005
Location: New Jersey USA
Posts: 4,216
Default Re: Small cracks in mortar.

Someone, years ago, entitled a post "enough with the cracks already". I know it's distressing, my oven cracked too, and I wasn't happy about it, but it's really common.

We can tell you more if you tell us what kind of brick, and mortar you're using.
__________________
My geodesic oven project:
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
,
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
Reply With Quote
  #3  
Old 05-28-2009, 12:52 PM
Serf
 
Join Date: Apr 2009
Location: North Yorkshire UK
Posts: 17
Default Re: Small cracks in mortar.

Thanks dmun.

I have attached some images of the oven as it is so far. Hopefully you can see the state of the cracks in the photo. I wasn't sure if I was being over worried (seems that I was).
The mortar is called WASC (wet air set cement) and thats all I know about it, I got it from a company called Handsworth refractories here in the UK, they use it for gluing firebricks together in foundry's, the guy said that it would keep a container of 300 tonnes of molten steel held together and for me not to worry.
I have also had some steam escaping from very fine cracks on the dome and wondered if this was OK too.

Thanks for the help.
Attached Thumbnails
Small cracks in mortar.-cracks.jpg   Small cracks in mortar.-oven_01.jpg  
Reply With Quote
  #4  
Old 06-05-2009, 04:24 PM
Peasant
 
Join Date: Aug 2008
Location: UK
Posts: 25
Default Re: Small cracks in mortar.

I have used the same supplier in the UK and also bought the air drying mortar. I didnít get on with the stuff at all. Mainly because it doesnít seem to "stick" to the bricks very well and takes a long time to dry. I used it mainly to fill in large gabs at the outside of the dome build. I used a fire clay/sand/cement mixture instead.

I have a crack in the mortar at the front arch which widens when the oven is really hot but after reading lots of comment in the forum about cracks this seems to be quite normal.

I would recommend to use your own mixture with fire clay. This has worked well for me.
Reply With Quote
  #5  
Old 06-05-2009, 04:36 PM
dmun's Avatar
Moderator
 
Join Date: Jul 2005
Location: New Jersey USA
Posts: 4,216
Default Re: Small cracks in mortar.

We've had bad reports about pre-mix mortars in this country, about strength and rigid setting and lack of water resistance. I sure wouldn't want to be any where near a container of molten steel held together with this stuff. I suspect they are designed for applications where they are immediately brought to higher temperatures than we use in a WFO.

That said, your cracks don't look so bad. I got similar cracks using a standard dry firebrick mortar mix.
__________________
My geodesic oven project:
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
,
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
Reply With Quote
  #6  
Old 06-05-2009, 06:33 PM
Neil2's Avatar
Il Pizzaiolo
 
Join Date: Oct 2006
Location: Vancouver Island
Posts: 1,374
Default Re: Small cracks in mortar.

The whole system is essentially a gravity structure with all elements acting in compression. I wouldn't worry about the cracks (unless bricks start to fall on your pizza).
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
High Heat Mortar Primer james Getting Started 81 11-08-2014 04:07 PM
Fire Mortar vs. Refax Refractory Mortar southpaw Pompeii Oven Construction 4 04-07-2007 06:02 AM
Two holes (not cracks) leaking smoke: mortar or furnace cement? Fio Pompeii Oven Construction 1 07-05-2006 08:27 AM
Repairing small cracks Yahoo-Archive Pompeii Oven Construction 0 03-21-2005 04:53 AM
Small cracks in vent Yahoo-Archive Design Styles, Chimneys and Finish 0 03-19-2005 09:38 AM


All times are GMT -7. The time now is 02:08 AM.

Powered by vBulletin® Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
© 2006/10 Forno Bravo, LLC