#1  
Old 05-14-2014, 12:49 PM
Serf
 
Join Date: May 2014
Location: Belfast
Posts: 3
Default Newbie Design

Hi,

I do not want to build a traditional clay oven but one out of bricks.

The plan would be a 1m x 1m x 1m square oven with fire bricks on the inside surrounded by 50mm fireblanket and an exterior of clay brick to match the house and garden.

The roof of the oven to be Vermiculite board with fire blanket and sand over it also. A 50mm hole in this for a small chimney and paving slabs with a chimney to complete the exterior.

It is to be buit on 350mm concrete foundation with vermciculite as a base with 30mm sand for the fireslab oven floor.

How much is wrong with this plan?

Thanks

Dave
Reply With Quote
  #2  
Old 05-14-2014, 01:09 PM
Tscarborough's Avatar
Il Pizzaiolo
 
Join Date: Oct 2009
Location: Ausitn
Posts: 3,143
Default Re: Newbie Design

The ceiling and vent inside the firing chamber.
Reply With Quote
  #3  
Old 05-14-2014, 01:13 PM
Serf
 
Join Date: May 2014
Location: Belfast
Posts: 3
Default Re: Newbie Design

Thanks for the reply so quickly!

OK no chimney and firebrick the ceiling, then Fireblanket?
Reply With Quote
  #4  
Old 05-14-2014, 01:26 PM
Tscarborough's Avatar
Il Pizzaiolo
 
Join Date: Oct 2009
Location: Ausitn
Posts: 3,143
Default Re: Newbie Design

Move the chimney to the front outside the opening, if you want one, and firebrick the ceiling, yes.
Reply With Quote
  #5  
Old 05-14-2014, 01:28 PM
Serf
 
Join Date: May 2014
Location: Belfast
Posts: 3
Default Re: Newbie Design

Understood,thanks!
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
42" Build Geelong AUS - Curved Stand (based on Maburton's design) Memphis Getting Started 0 01-07-2014 12:56 AM
Russian oven design, unusual hearth floor. Turkish gambit Getting Started 0 02-04-2013 08:50 PM
Commercial oven design... what is best? Stone Mason1 Commercial Pizza Ovens 5 01-09-2012 04:42 AM
Help Needed!!! Newbie Trying to design a Pompeii Oven. Rino C Getting Started 0 06-04-2010 11:26 AM
Newbie Design Phase Jacksonville woodhead Getting Started 6 01-21-2008 04:41 PM


All times are GMT -7. The time now is 10:16 PM.

Powered by vBulletin® Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
2006/10 Forno Bravo, LLC