#1  
Old 11-15-2011, 01:38 PM
Serf
 
Join Date: Nov 2011
Location: Victoria
Posts: 4
Default Need help in Victoria

Hi all,

New to the forums and already loving them! Ive scoured and sourced and am just about ready to start my build, however I ask for a little bit of help. The Forno Bravo plans and common sense say to check with local council about regulations regarding building a wood fired oven, however, when I asked my local council, in inner suburban Melb., they had no idea about specific regualtions for a woodfired oven, and even went as far to say that any such structure would be illegal Now, I put this down to possibly speaking to the wrong person on the wrong day, as I'm sure others have had more helpful advice from their local councils.

As is my brief understanding of building codes in Victoria, there is not much discrepancey form council to council in terms of regulations, mainly just in how they are enforced. As I am reluctant to ask many more questions form my local council for fear they actually do deem it illegal, I am wondering if any other folks in Melbourne or Victoria have had better luck getting council advice.

Any help from any municipality would be great, as I'm more than happy take any info provided, along with the building code of Victoria, and my Barrister girlfriend, (if the need arise ) for the adivce on any council regs on wood fired ovens. Surely they can't be illegal.

Thanks in advance,

Jimbo
Reply With Quote
  #2  
Old 11-16-2011, 12:16 PM
Apprentice
 
Join Date: Sep 2010
Location: Mesa, AZ
Posts: 235
Default Re: Need help in Victoria

Jimbo:

Try telling the building department that it is an outdoor fireplace or outdoor barbecue pit and see what they say. Don't use the word "structure" in your discussions with them because "structure" has a particular meaning in zoning, planning, and permitting. Around here, a project that does not involve a "structure" doesn't require a permit.
Reply With Quote
  #3  
Old 11-16-2011, 09:21 PM
brickie in oz's Avatar
Il Pizzaiolo
 
Join Date: Mar 2009
Location: Whittlesea
Posts: 3,455
Default Re: Need help in Victoria

The first mistake you made was talking to someone on the council, half of them wouldnt know what country they were in if it wasnt written down for them.

I have also searched the regs and building codes, I have been in the building game in Melb for over 40 years and can find nothing on WFO's, I would think the same regs would apply as to wood BBQ"s, ie, dont light them on total fire ban bays, and why would you anyway.

Properly built with lots of insulation the only problem that may be encountered is sparks coming out of the top of the flue which would be minimal with Aus hardwood.

The oven's outer skin wont get hot if you use the proper amount of insulation, my oven gets about 20c above ambient after a pizza party which is far cooler than a wood BBQ would get.

Smoke can almost be eliminated with good dry firewood, so that shouldnt be a problem either.

Then there is always VCAT if you ever get some over zealous official, most cases brought to VCAT go in the house owners favour.
__________________
The English language was invented by people who couldnt spell.


To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.



To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
Reply With Quote
  #4  
Old 11-17-2011, 01:56 AM
Serf
 
Join Date: Nov 2011
Location: Victoria
Posts: 4
Default Re: Need help in Victoria

Thats exaclty what I thought. Past experiences with the council have led me to not ever want to deal with them again, hence me not wanting to go much further, other than asking annonymous questions of them.

You are quite right from my research about the building code, and I also have it on file, name, time etc of certain council officials who have told me they know nothing about WFO and it isnt an issue, so you are right that if it goes anywhere near VCAT, the argument is on my side.

No offense to anyone in local councils, but it is true, they are more harm than good.
Reply With Quote
  #5  
Old 11-17-2011, 04:09 PM
OzOvenBuilder's Avatar
Laborer
 
Join Date: Oct 2011
Location: Western District, Victoria, Australia
Posts: 79
Default Re: Need help in Victoria

Quote:
Originally Posted by brickie in oz View Post
The first mistake you made was talking to someone on the council, half of them wouldnt know what country they were in if it wasnt written down for them.

I have also searched the regs and building codes, I have been in the building game in Melb for over 40 years and can find nothing on WFO's, I would think the same regs would apply as to wood BBQ"s, ie, dont light them on total fire ban bays, and why would you anyway.

Properly built with lots of insulation the only problem that may be encountered is sparks coming out of the top of the flue which would be minimal with Aus hardwood.

The oven's outer skin wont get hot if you use the proper amount of insulation, my oven gets about 20c above ambient after a pizza party which is far cooler than a wood BBQ would get.

Smoke can almost be eliminated with good dry firewood, so that shouldnt be a problem either.

Then there is always VCAT if you ever get some over zealous official, most cases brought to VCAT go in the house owners favour.

Absolutely, dont tell them a damn thing! If they ever get wind of what's out there they'll slap another permit/fee on all WFO claiming it's a fire levy or some crap along those lines!
__________________
Boom Shanker! (Neil - The Young Ones)


To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.


To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
Reply With Quote
  #6  
Old 11-17-2011, 05:24 PM
Serf
 
Join Date: Nov 2011
Location: Victoria
Posts: 4
Default Re: Need help in Victoria

Thanks guys,

You have pretty much confirmed everything I was thinking already. I will certainly not be asking any more questions of the council. Its just easier that way.

On a bit of a side not tho, but still council related:

A great piece of advice I was given when dealing with councils, always, ALWAYS leave some piece of information off of what they need and ask you for initially, as they are guaranteed to come back and ask for something more, its just how they work,and if you know what it is and have it ready to go, it speeds it up (hopefully).

It's called playing them at their own game
Reply With Quote
  #7  
Old 11-17-2011, 05:45 PM
mrchipster's Avatar
Il Pizzaiolo
 
Join Date: Apr 2010
Location: Minneapolis, MN USA
Posts: 1,214
Default Re: Need help in Victoria

You sure got to love the bureaucratic busy bodies... We have them here also but yours seem to grow on all of the greenie trees. Sooner or later they will start saying trees are not a renewable resource and say you cannot burn wood. Oh BTW ... Good Luck!.

Chip

Last edited by mrchipster; 11-17-2011 at 05:48 PM.
Reply With Quote
  #8  
Old 11-17-2011, 08:43 PM
brickie in oz's Avatar
Il Pizzaiolo
 
Join Date: Mar 2009
Location: Whittlesea
Posts: 3,455
Default Re: Need help in Victoria

Here is your answer from our council Whittlesea, they are ball breakers too BTW.
Down the bottom, Wood Heater.

The code should be Aus wide as the building code is supposed to be Aus wide.

Do I need a building permit?
__________________
The English language was invented by people who couldnt spell.


To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.



To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
Reply With Quote
  #9  
Old 03-07-2012, 02:34 AM
Serf
 
Join Date: Mar 2012
Location: Victoria, Australia
Posts: 1
Default Re: Need help in Victoria

Hi Jimbo, How is your oven going
What size did you buy, is it installed & working ok now ?
I have a Casa2G90 on order, can't wait to get started on it..

regards
Phil, Yarra Valley, Victoria.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Greeting from Victoria, Canada robvious Introductions 12 12-17-2008 07:32 PM
Hi all :-) from Ballarat Victoria nodoubt68 Introductions 12 12-16-2008 03:30 AM


All times are GMT -7. The time now is 12:55 PM.

Powered by vBulletin® Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
2006/10 Forno Bravo, LLC