#1  
Old 01-29-2014, 04:52 PM
Serf
 
Join Date: Oct 2013
Location: Keizer, Oregon
Posts: 3
Default Cracked Dome and Rough Floor

Hi-

New here and in need of some help.

I purchased a used mobile oven in 2012 from a FB dealer although, I don't think she is very active. The oven was in good shape. After a year of use dragging it back and forth to the local farmers markets I have noticed some small cracks which I've been told not to worry about and a major chunk out of the back of the oven on the inside. Also, the floor is very rough and pizza will often stick to that area.

My question is how should I proceed on the repair of both.

The oven is the Casa 36inch. the chunk is triangular in shape and measures about 3 inches at the base and is about 3inches tall. It appears to be a chunk out of the shell itself.

I wish I had photos to show you, but it is tucked away for the winter it the shop. I have a roof that raises up but is currently lowered over the oven opening, so hard to get photos unless I pull out.

I live in Keizer Oregon about 45 minutes from Portland. The dealer will not be of any help.

Would appreciate all of the expetise on this forum on how to proceed.

Thanks in advance,
Tina
Reply With Quote
  #2  
Old 01-31-2014, 06:49 AM
Journeyman
 
Join Date: Mar 2009
Location: North Louisiana
Posts: 305
Default Re: Cracked Dome and Rough Floor

pictures would help...
Reply With Quote
  #3  
Old 01-31-2014, 09:49 AM
Apprentice
 
Join Date: May 2011
Location: UK
Posts: 216
Default Re: Cracked Dome and Rough Floor

If you have the piece can you not glue it back with refractory cement? An option for the floor is to use refractory bricks but make sure it is level, otherwise pizza will catch
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Lancer's Philippine Build, Close to Australia Anyhoo... Lancer Australia 525 10-20-2014 03:02 AM
Dome spreadsheet calculator deejayoh Tools, Tips and Techniques 73 07-08-2014 05:44 PM
Newbie dome question - 2.5" thick instead of 4.5? Cheesehead Newbie Forum 16 08-23-2010 06:06 PM
Smooth or Rough Domes? Xabia Jim Design Styles, Chimneys and Finish 4 04-04-2007 12:20 PM
I've laid the oven floor bricks: 4 questions Fio Pompeii Oven Construction 20 05-29-2006 04:34 AM


All times are GMT -7. The time now is 09:54 PM.

Powered by vBulletin® Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
2006/10 Forno Bravo, LLC