Forno Bravo Forum: The Wood-Fired Oven Community

Forno Bravo Forum: The Wood-Fired Oven Community (http://www.fornobravo.com/forum/)
-   Design Styles, Chimneys and Finish (http://www.fornobravo.com/forum/f9/)
-   -   Applying real stone to block (http://www.fornobravo.com/forum/f9/applying-real-stone-block-4939.html)

ricflo 08-28-2008 07:42 PM

Applying real stone to block
 
I put screen around the oven. Now do I put mortar and scratch it? Let it dry and then put the stone on? Or do I put mortar on the screen and apply the stone while it is wet? New at this so be patient with me LOL

Modthyrth 09-01-2008 04:51 PM

Re: Applying real stone to block
 
I've never worked with real stone, so I can't help you with the specifics of your question. I have used the stone veneer, and the guy who made it told me to spread mortar on the back of the stone like slathering peanut butter on, then just stick it to the concrete block. It worked beautifully. Each piece of veneer is a different size, so it's like piecing together a puzzle, and I didn't want to spread the mortar directly on a section of the concrete block for fear that it would dry out before I found just the right sized piece to fit the space. The peanut-butter method was just right for my pace.

One of the pros here on this site recommended using Thinset Stone and Tile--said it was even stickier and easier to use. I'm going to try that as soon as my current supply of mortar runs out.

I know other people here have worked with natural stone, so perhaps they can chime in and give you material-specific advice.

PIZZAMANMIKE 09-02-2008 09:24 AM

Re: Applying real stone to block
 
A scratch coat makes a good base to apply stone, but not needed. I wood use the thin set as is better bonding power, and less chance af falling off. With real stone make sure your starter course is dry before you go higher.Then do a few rows a day and you should be fine.

Unofornaio 09-02-2008 11:55 PM

Re: Applying real stone to block
 
What type of stone is it?
What is its dimension: Veneer, cobble, rubble, etc?

This information will help me answer the question.

Thanks
JP

Grew up near Pittsburgh, PA where are you at?

RTflorida 09-03-2008 04:23 PM

Re: Applying real stone to block
 
Uno, great to see you are still around. A lot of new folks lately could have used your expertise. Hope you have the time to share with us, as in the past.

RT

Frances 09-04-2008 02:03 AM

Re: Applying real stone to block
 
Yep, we've been missing you!

wesslock 09-04-2008 05:49 AM

Re: Applying real stone to block
 
I just did the same thing this weekend and was told to use Type S Masons Mortar. Havents seen it sicne we pit the stones up so dont know how it held up yet.
Will post pix later .


All times are GMT -7. The time now is 03:01 AM.

Powered by vBulletin® Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
2006/10 Forno Bravo, LLC