Thread: Tool storage
View Single Post
  #3 (permalink)  
Old 02-18-2007, 10:13 PM
Hendo Hendo is offline
Journeyman
 
Join Date: Oct 2006
Location: Adelaide, Australia
Posts: 257
Default Re: Tool storage

I saw the sliding storage unit when we were looking at alternatives for our new kitchen - very neat if you've got a spare section of wall with enough depth behind it.

In my planned outdoor kitchen area, I'll have a full length bench with the oven entrance in the middle, so I like the idea of a compartment above the dome, to the left of centre. The image below shows a similar setup, but in a different location. I'd like mine smaller if possible, so that it doesn't predominate too much. I'm planning to attach wall brackets to the inside face of the external brickwork, clear of the dome, lay some cement sheet on them as a 'floor' of the compartment, and box it up somehow before the roof goes on. The brickwork at the front face of the oven will have an opening / slot to put the utensils in by.

Cheers, Paul.
Attached Thumbnails
You must be a registered user to view attachments. Click to register. It's easy.
Reply With Quote