Forno Bravo Forum: The Wood-Fired Oven Community

Forno Bravo Forum: The Wood-Fired Oven Community (
-   Pompeii Oven Construction (
-   -   Vent & Chimney (

ricflo 09-06-2007 05:16 PM

Vent & Chimney
I am finally to my vent and chimney. I just have a couple of questions. A friend is manufacturing my vent out of steel. Is 20 inches long and 8 inches wide to big? The liner is 6" by 2'. I am new at this building thing, so bear with me with my lingo.

christo 09-08-2007 08:40 AM

Re: Vent & Chimney
My 39" oven has an 8x8 inch flue and seems to draw just fine.

There is a lot of information on the site that relates flue size to oven size.

If you can post a picture it would help. But based on the information, if you have a 20x8 inch transistion to an 8x8 square or 8 inch round, it should work well for the average sized ovens I see built here.

good luck!!!


All times are GMT -7. The time now is 07:42 PM.

Powered by vBulletin® Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
2006/10 Forno Bravo, LLC