Forno Bravo Forum: The Wood-Fired Oven Community

Forno Bravo Forum: The Wood-Fired Oven Community (http://www.fornobravo.com/forum/)
-   Pompeii Oven Construction (http://www.fornobravo.com/forum/f8/)
-   -   vent chimney ? (http://www.fornobravo.com/forum/f8/vent-chimney-18035.html)

dsm 07-09-2012 03:47 PM

vent chimney ?
 
Hello ,, is it ok to vermiculite and portland mix the whole vent and clay flue in,meaning frame around it and and filling it in with v/p mix..


Thanks ,
Dave

david s 07-10-2012 01:28 AM

Re: vent chimney ?
 
Yes it is OK, if fact it is a really good idea, because although you don't really need to retain the heat in the flue and the entry it will both support the structure and reduce the temperature differential between the inside and the outside which can be damaging.

dsm 07-10-2012 06:22 AM

Re: vent chimney ?
 
Ok great that is why I wanted to do it mainly for the support to hold it all together.thanks david .

dsm 07-10-2012 06:47 PM

Re: vent chimney ?
 
1 Attachment(s)
vermiculite and portland mix ready to go...

dsm 07-10-2012 06:48 PM

Re: vent chimney ?
 
1 Attachment(s)
vermiculite/portland mix ready to go

Les 07-10-2012 08:44 PM

Re: vent chimney ?
 
Dave,

I laid my decorative brick about an inch from the flue pipe and worked the vermiculite / portland in between the two. You are obviously using a form so what is your plan on the finish? The route you are going, you could pretty much do anything. Great idea, opens up a LOT of potential.

dsm 07-11-2012 06:24 AM

Re: vent chimney ?
 
1 Attachment(s)
The forms are off. I am thinking of a enclosure les, i v/p the vent for structure and insulation purpose. I am pretty much winging it, i have been making up ideas as i go on, every time i have a idea i change it anyway,lol...so will see where it goes from here.


All times are GMT -7. The time now is 04:31 PM.

Powered by vBulletin® Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
2006/10 Forno Bravo, LLC