
11-01-2010, 11:21 AM
|
| Apprentice | | Join Date: Jul 2005 Location: Toronto
Posts: 103
| |
Re: Tony's Oven Build The hearth slab is around 60x80 (I forget the actual measurements and would have to go measure to be exact). My oven is around 40-42" inside diameter (again I'd have to go measure as I do not recall the exact measurement I went with). The clay pipe is actually 8x12 and I have 4FT in there. I was going to go 8x8 but a brick layer at the store just happen to be there when I was there buying my stuff and he told me 8x8 would be too restrictive. You know what, I am glad I went 8x12. I know my previous oven was an 8x8 and I used to get some some out on the facade. The ledges are only about 1" when all the enslosure is on. The less the better as far as I am concerned so there is no ledge for water or snow to sit on and leach under the exterior.
Good luck with your build. |