Forno Bravo Forum: The Wood-Fired Oven Community

Forno Bravo Forum: The Wood-Fired Oven Community (http://www.fornobravo.com/forum/)
-   Pompeii Oven Construction (http://www.fornobravo.com/forum/f8/)
-   -   squirting fire mortar into some cracks/voids (http://www.fornobravo.com/forum/f8/squirting-fire-mortar-into-some-cracks-18128.html)

ThermoJax 07-26-2012 07:15 AM

squirting fire mortar into some cracks/voids
 
so, it has been a couple of years since my build was completed. My buddy and I have been looking at some of the joints inside and have decided that I will have to climb in soon enough and squirt something in, or use a pointing tool and mush some stuff in what appears to be a void or crack. Basically, a place or two that looks like it really needs it.


We have Atlantic Firebrick just north of town, that is where I got the more high tech supplies for my build, like the insulation, and the floor tiles. I did notice that they had other products like what I think I need for this job, but seem to have a memory of a small tub being like $60 or $120. I don't have any materials left from two years ago, so I guess I will have to let the wallet bleed a little.

any thoughts?

Tom

Tscarborough 07-26-2012 07:18 AM

Re: squirting fire mortar into some cracks/voids
 
See if you can find a product called "Fire-pak" it is a wet refractory in a caulk tube, should run 10-12 bucks.

ggoose 07-26-2012 11:37 PM

Re: squirting fire mortar into some cracks/voids
 
Tscar,

I did a web search for the product you mention, but to no avail (do you have a link?). This stuff looks pretty good, and it seems to be more readily available: Fireplace mortar


All times are GMT -7. The time now is 07:23 AM.

Powered by vBulletin® Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
2006/10 Forno Bravo, LLC