Forno Bravo Forum: The Wood-Fired Oven Community

Forno Bravo Forum: The Wood-Fired Oven Community (http://www.fornobravo.com/forum/)
-   Pompeii Oven Construction (http://www.fornobravo.com/forum/f8/)
-   -   Rear to frt measurement please (http://www.fornobravo.com/forum/f8/rear-frt-measurement-please-19528.html)

GIANLUCA 06-14-2013 06:39 PM

Rear to frt measurement please
 
1 Attachment(s)
I am planning the arch placement on the floor my question is there a specific measurement from int rear to int frt of arch placement so the dome will intersect? I am buildings 42" int diameter oven. I am going to bevel the arch to intersect

jbruning 06-14-2013 07:02 PM

Re: Rear to frt measurement please
 
1 Attachment(s)
Here is the basic layout I used for my 42 inch. It seemed to work ok, and it wasn't too bad to tie in. I wanted a 20 inch wide opening and I simply used a 20 inch chord set perpendicular to the radius (I guess all chords are perpendicular to the radius).

GianniFocaccia 06-15-2013 01:04 PM

Re: Rear to frt measurement please
 
1 Attachment(s)
Cut a second inner dome-profile template and trim it vertically so that its curve matches up with the top of your inner arch form. This will determine the placement of your inner arch.

Here's some more pics: (Post #34)

http://www.fornobravo.com/forum/8/octoforno-7122-4.html


All times are GMT -7. The time now is 05:50 AM.

Powered by vBulletin® Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
2006/10 Forno Bravo, LLC