Forno Bravo Forum: The Wood-Fired Oven Community

Forno Bravo Forum: The Wood-Fired Oven Community (http://www.fornobravo.com/forum/)
-   Pompeii Oven Construction (http://www.fornobravo.com/forum/f8/)
-   -   IN progress (http://www.fornobravo.com/forum/f8/progress-17279.html)

TLS 01-23-2012 07:40 AM

IN progress
 
I would like confirmation of the need to put a mortar base under the floor firebrick when placed on ceramic board?

Faith In Virginia 01-23-2012 09:38 AM

Re: IN progress
 
Hay TLS

If your placing your floor on ceramic board I would not use a mortar base under your firebricks instead I would use a sand and fireclay mix. You will find that your firebricks are not an absolute in dimension so if you laid them out on a flat surface you will find a bit of a ridge in certain places from one brick to the next. The purpose of the fireclay sand mix is to act like a leveling agent for the bricks. This way as you remove things from the oven your peal wont be catching brick edges. If you have ever laid floor tiles you do it in the same way using a notched trowel.

Hope that helps, we would love to see some pictures.
Faith

TLS 01-23-2012 11:43 AM

Re: IN progress
 
Thanks so much, i will post some pictures soon, just the stand and floor in place at the moment.


All times are GMT -7. The time now is 11:43 AM.

Powered by vBulletin® Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
2006/10 Forno Bravo, LLC