Forno Bravo Forum: The Wood-Fired Oven Community

Forno Bravo Forum: The Wood-Fired Oven Community (http://www.fornobravo.com/forum/)
-   Pompeii Oven Construction (http://www.fornobravo.com/forum/f8/)
-   -   Oven Floor Question. (http://www.fornobravo.com/forum/f8/oven-floor-question-4322.html)

George T 06-18-2008 12:28 PM

Oven Floor Question.
 
I used just the sand and fireclay in a dry mix per Dmun's advice and then wetted the brick to solidify. I used a 2 parts sand to 1 part fireclay mixture. Hope that will hold ok.....since I was not using any portland I was hesitant to use too much sand. Any concerns from the experts?

Thanks for the help....I just did not want to get buttoned up and find out this was not a good idea.

GT

dmun 06-18-2008 12:42 PM

Re: Oven Floor Question.
 
Sounds good to me. All you are doing is laying down a layer to level your bricks. Gravity will hold everything down.


All times are GMT -7. The time now is 04:52 AM.

Powered by vBulletin® Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
2006/10 Forno Bravo, LLC