Forno Bravo Forum: The Wood-Fired Oven Community

Forno Bravo Forum: The Wood-Fired Oven Community (http://www.fornobravo.com/forum/)
-   Pompeii Oven Construction (http://www.fornobravo.com/forum/f8/)
-   -   flue questions (http://www.fornobravo.com/forum/f8/flue-questions-7798.html)

buix5 09-06-2009 06:46 PM

flue questions
 
I built a pompeii oven with a 48 inch interior diameter using the FB plans. I'm venting with clay pipe from the mouth of the oven to the top of the dome. I need to run the flue up 2 floors. Any recommendations on what diameter flue and clay pipe I need?

Sincerely,
Buix5

dougrappe 09-09-2009 10:44 AM

Re: flue questions
 
Hey Buix5, have you had a look at Dmun's build:

http://www.fornobravo.com/forum/f9/d...t-ii-1876.html

It's a smaller oven, but has a tall chimney like you describe, also a meticulously documented build. Lots of good info.

Doug

Rastys 09-11-2009 05:53 AM

Re: flue questions
 
I have a 40" Pompeii with an 8" round steel flue 10' high and it draws a treat with absolutely no smoke out the front arch.
I would play it safe and run either an 8" square or preferable 10" round stainless flue if I was to install one.
Cheers.

Rastys


All times are GMT -7. The time now is 10:03 PM.

Powered by vBulletin® Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
2006/10 Forno Bravo, LLC