Forno Bravo Forum: The Wood-Fired Oven Community

Forno Bravo Forum: The Wood-Fired Oven Community (http://www.fornobravo.com/forum/)
-   Pompeii Oven Construction (http://www.fornobravo.com/forum/f8/)
-   -   Construction material scraps (http://www.fornobravo.com/forum/f8/construction-material-scraps-5486.html)

mfiore 11-04-2008 10:56 AM

Construction material scraps
 
I'm getting ready to start curing my oven. I know when cooking, it's recommended to use hard wood. How about during the curing process? Will it be OK to burn up some scraps of 2x4, etc from the construction process, or will that stink up my oven. I have a lot of that stuff to get rid of.

asudavew 11-04-2008 11:26 AM

Re: Construction material scraps
 
That should be just fine.
Just don't used any treated lumber.
Toxic fumes with them.

mfiore 11-04-2008 11:27 AM

Re: Construction material scraps
 
How about plywood?

nissanneill 11-04-2008 03:38 PM

Re: Construction material scraps
 
Just be a little selective as to what you burn in your oven for toxic fumes and residues, but a little ply should not cause any harm.
I would not use much (if any) 'marine' or 'industrial ply' as it 'waterproof' and has a 2 pack adhesive which 'could be harmful' when burnt. If you have a ready supply and would like to use it, then contact the manufacturer for additional information. They must by law have MSDS sheets (material safety data sheets) explaining their products and safety issues etc.

Neill


All times are GMT -7. The time now is 08:31 PM.

Powered by vBulletin® Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
2006/10 Forno Bravo, LLC