Forno Bravo Forum: The Wood-Fired Oven Community

Forno Bravo Forum: The Wood-Fired Oven Community (http://www.fornobravo.com/forum/)
-   Pompeii Oven Construction (http://www.fornobravo.com/forum/f8/)
-   -   Chimney Question (http://www.fornobravo.com/forum/f8/chimney-question-17833.html)

dlebla 05-31-2012 08:31 AM

Chimney Question
 
I found chimney pipe that somebody removed a wood stove and wants to get rid of. Will this work? This is all the info I have.

I have 2 sections of stainless steel insulted stove pipe. 30 inches long 8 inch INSIDE DIAMETER. Also cap and cone that sits on the roof. Took out wood stove and no longer need it. Its in really good shape. I can't find any markings on the pipe. I purchased it from some place that deals with insulated pipe and stuff. I don't remember the name, however, this was/is the best that you could buy. I just want rid of it

Thoughts? I can get it for $100.

Gulf 05-31-2012 04:35 PM

Re: Chimney Question
 
You better jump on it, quick:)
EDIT: Sorry:o
I misread the post. Someone in your area who can pick it up locally needs to jump on this:D.

dlebla 05-31-2012 04:38 PM

Re: Chimney Question
 
So this one should work okay? Just want to make ste before I purchase. Thanks

Gulf 05-31-2012 04:53 PM

Re: Chimney Question
 
Quote:

Originally Posted by dlebla (Post 132434)
So this one should work okay? Just want to make ste before I purchase. Thanks

2 layers of insulated SS with the caps etc. would probably be a great deal for that price. As long as you are not bound by a fire code which may stipulate 3 layers. (Depending on the application)

dlebla 05-31-2012 05:03 PM

Re: Chimney Question
 
I had talked to the building dept last fall, I haven't started my oven yet. At that time the inspector told me it was just a general permit needed and there were no real requirements as I had lots of questions. I have been looking on Craigslist and have sourced lots of materials for free or very cheap. I have been looking for a god deal on the chimney as I like that style best and finally found this one. I just wanted to check to make sure this would be acceptable as I know absolutely nothing about chimneys. Thanks for the quick reply, since it looks like this will work I'm going to email him right now. Thanks again!

Gulf 05-31-2012 05:15 PM

Re: Chimney Question
 
I think you will be all right. As for as "depending on the application" is conserned as long as you are not building inside your home or something attached to it. That is where building codes get real sticky, for a real good reason though :).

dlebla 05-31-2012 05:18 PM

Re: Chimney Question
 
No the oven will not be part of my house. It's going to be out in the backyard, which will be good as it will keep me out of the house and away from the wife....:)

Gulf 05-31-2012 05:43 PM

Re: Chimney Question
 
I bought one section of 8" double wall SS double wall and the cap for 60 bucks (from a local salvage store) and just thought that I got a great deal. I haven't totally ruled out using it if I need to extend my chimney in the future, but it is on stand by if I need it. I want try to give a value of the 2 sections and cap that you purchased but the only local source which I priced was 250 bucks per section of 3 wall. I think that you are getting a good deal.

UtahBeehiver 05-31-2012 06:14 PM

Re: Chimney Question
 
If they have an anchor plate with it. Grab it. Cost about $40 to buy one.

Russell

dlebla 05-31-2012 06:38 PM

Re: Chimney Question
 
Thanks everyone for getting back to me. I just sent him an email and am waiting to see if he still has it. Fingers crossed.


All times are GMT -7. The time now is 06:30 AM.

Powered by vBulletin® Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
2006/10 Forno Bravo, LLC