| Pizza Ovens | (800) 407-5119 | Info@fornobravo.com |
![]() |
|
#1
| ||||
| ||||
| Hey guys, just a question... when you are mixing your ingredients in your mixers (heavens forbid a kitchen aid... as I found out they are... lets say "disliked" in this community) what order do you put the ingredients in? 1. Water 2. Salt. 3. Yeast 4. touch of oil (i think dough needs it) 5. Flour? Also... do you just dump it all in there or gradually let it mix by slowly adding bits of flour? I usually do it by hand but I would like to know how mix it using the machine. When mix by hand I do it right on the counter and slowly incorporate the flour into the water-yeast mixture. Any pointers on how to use my kitchen aid (before it burns out on me) would be greatly appreciated.
__________________ Pizza is not food... it is art. |
|
#2
| |||
| |||
| sssmasi: All the water, 70% of simmered flour, all the preferment (if used) mix two minutes in first speed, rest by 15 to 30´ (autolyse). After that, the left flour is mixed, then the salt and finally the oil. Knead by hand in a floured surface until the desired consistency is achieved. Divide the dough in balls weight and left to rest (refrigerated) by 24 to 72 hs. Good luck. Luis |
|
#3
| ||||
| ||||
| Luis, Agreed. That's the same order and procedure I often use with bread doughs. You don't want the salt in direct contact with the yeast or preferment from the very beginning, because neither one responds well to it at first. Jim |
|
#4
| ||||
| ||||
| I agree with Luis (and Jim) on the autolyse technique. It's easy to do, and improves our dough. Your flour needs a moment (well, 30 mintues) to absorb the moisture before you start to work it. James
__________________ To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. |
|
#5
| ||||
| ||||
| I pulled this from the forno bravo web page (http://www.fornobravo.com/vera_pizza.../VPN_spec.html) Quote:
__________________ Pizza is not food... it is art. |
|
#6
| ||||
| ||||
| Quote:
Last - oil in the dough is for lower temperature pizza making to help with browning. In the higher temperatures of a brick oven it is not used. |
|
#7
| ||||
| ||||
| All, We're dealing with temp here. The dough should not get above 80 F. This will vary according to the friction factor of the mixer you're using. If it approaches max temp in the mixer but still isn't quite right, pull it and finish on the bench by hand. Bang it around to develop the gluten, fine, but don't overheat it. Otherwise, rising will be affected, and you might end up with a tough dough. Jim |
|
#8
| ||||
| ||||
| Thanks guys for the help. I've never tried the autolyse technique before and I am ashamed to say that I have never even heard of it. I'm definitely gonna this weekend hopefully I will get good results. Do you guys use this same recipe/technique for focaccia? I ordered Peter Reinhart's books The Bread Bakers Apprentice and American Pie of amazon after noticing that his books seem to be praised as the best. Anyone know of any other good pizza books?
__________________ Pizza is not food... it is art. |
|
#9
| ||||
| ||||
| Though it's not only about pizza, you'll probably find Carol Field's The Italian Baker both useful and interesting. She's done other books, of course, but this one is the largest and most complete. Jim |
|
#10
| ||||
| ||||
| I am currently using Reinhart's book for both pizza and foccacia with good results. Drake |
| Thread Tools | |
| Display Modes | |
| |
| | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Artigiano question... | johnrbek | Modular Refractory Oven Installation | 9 | 02-21-2007 04:35 AM |
| Pouring Hearth Question | telehort | Getting Started | 7 | 01-29-2007 04:20 PM |
| Oven Kit Question :confused: | mrpbjnance | Modular Refractory Oven Installation | 3 | 04-18-2006 06:08 PM |
| Construction of Chimney question | dmun | Design Styles, Chimneys and Finish | 0 | 07-18-2005 03:08 PM |