Forno Bravo Forum: The Wood-Fired Oven Community

Forno Bravo Forum: The Wood-Fired Oven Community (http://www.fornobravo.com/forum/)
-   Modular Refractory Oven Installation (http://www.fornobravo.com/forum/f7/)
-   -   Reconditioning Refractory Oven (http://www.fornobravo.com/forum/f7/reconditioning-refractory-oven-18318.html)

heliman 09-07-2012 04:10 AM

Reconditioning Refractory Oven
 
I have had my refractory WFO for about 11 years now and the inside is starting to show signs of cracking and the surface is very uneven and pitted.

Is it possible to recondition the inside of the WFO and get it smooth and like it was when it was installed. Or, is this perhaps a natural part of the ageing process for a WFO and should just leave it as it is. It still seems to cook OK?

cobblerdave 09-08-2012 11:54 PM

Re: Reconditioning Refractory Oven
 
Gudday
Ditto with what Mick said
but if you just can't leave it alone just one experimental patch better on the side of the oven you put you fire and watch it for a while. If it falls of no damage done

Regards Dave


All times are GMT -7. The time now is 08:40 PM.

Powered by vBulletin® Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
2006/10 Forno Bravo, LLC