Forno Bravo Forum: The Wood-Fired Oven Community

Forno Bravo Forum: The Wood-Fired Oven Community (http://www.fornobravo.com/forum/)
-   Modular Refractory Oven Installation (http://www.fornobravo.com/forum/f7/)
-   -   Oven stand dimensions (http://www.fornobravo.com/forum/f7/oven-stand-dimensions-9395.html)

jbuildarkansas 12-09-2009 07:17 AM

Oven stand dimensions
 
Okay, so here's a dumb question: I am installing a Casa2G100 oven and it calls for a stand 54" x 61". Using 8x8x16 or 8x8x8 inch blocks, how do I achieve those dimensions? Thanks!

Tscarborough 12-09-2009 07:35 AM

Re: Oven stand dimensions
 
Make the joints wider.

james 12-09-2009 08:37 AM

Re: Oven stand dimensions
 
If the joints get really wide, you can easily cut CMUs -- using a masonry blade on either a skill saw or grinder. It's noisy and dusty, but it isn't difficult.
James

eprante 12-09-2009 09:41 AM

Re: Oven stand dimensions
 
You could make it 56 X 64 and have a slightly larger stand ( actually less than that because the blocks measure about 3/8" less than stated measurements) by dry stacking them and filling the cores.
Eric

jbuildarkansas 12-09-2009 09:44 AM

Re: Oven stand dimensions
 
Thanks, guys! I appreciate the help.


All times are GMT -7. The time now is 09:37 PM.

Powered by vBulletin® Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
2006/10 Forno Bravo, LLC