Forno Bravo Forum: The Wood-Fired Oven Community

Forno Bravo Forum: The Wood-Fired Oven Community (
-   Modular Refractory Oven Installation (
-   -   Giordino70 (

rossano 04-05-2011 08:09 PM


I'm getting the Giardino 70 kit and have a few questions.
Im looking at the installation manual and on page 19 where they show the mesh on the dome.Is it fastened to the base of the oven and to the arch at the opening with some sort of screws? If so,is it ok to drill into it with a concrete bit and what i imagine would be rawl plugs for the screws?

horrocks007 07-11-2011 06:40 PM

Re: Giordino70
How did everything work out for you? I saw your posts, I just ordered my giardino 70 yesterday. I Am surprised no one responded.

rossano 07-11-2011 10:14 PM

Re: Giordino70
Everything worked out great. You will love your giardino :)

horrocks007 07-12-2011 06:56 AM

Re: Giordino70
So did you end up screwing the wire mesh into the oven, or did you just let it hang around the insulation?

rossano 07-12-2011 07:00 AM

Re: Giordino70
Yes. I did. I put a minimum amount of screws to hold the mesh to keep the shape I wanted. I used short tapcons. Just long enough to hold mesh and fender washer

rossano 07-12-2011 07:00 AM

Re: Giordino70
I just did that on the front of the oven.

horrocks007 07-12-2011 08:45 PM

Re: Giordino70
Thanks, I am sure I'll need to do the same thing.

Did you have a picture of your finished oven? I would love to see it! There are not a lot of Giardino-70 pics on here.

rossano 07-12-2011 08:50 PM

Re: Giordino70
Send me your e mail address and i can e mail you some

All times are GMT -7. The time now is 05:08 PM.

Powered by vBulletin® Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
2006/10 Forno Bravo, LLC